SICA 10 S 3 CP v2017
Paramètres Thiele-Small
| Taille nominale | 10" |
|---|---|
| Impédance | 8 Ω |
| Fs | 43 Hz |
| Qts | 0.313 |
| Qes | 0.34 |
| Qms | 4.02 |
| Vas | 39.9 L |
| Sd | 346.4 cm² |
| Xmax | 7 mm |
| Re | 5.1 Ω |
| Bl | 15.3 T·m |
| Mms | 57.8 g |
| Pe | 450 W |
| Sensibilité | 93.6 dB |
Indication d'alignement
| EBP | 126 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 9.7 L |
EBP > 100 : favorise un alignement bass-reflex.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Candidats de substitution
| HP | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| Sica 10 S 3 CP | 42 -1 | 0.3 -0.01 | 42.8 +2.9 | 7 = | 94 +0.4 | close | + | |
| Beyma 10MW/ND | 49 +6 | 0.32 +0.01 | 40.7 +0.8 | 7.5 +0.5 | 93.5 -0.1 | close | 6 Ω vs 8 Ω: amp load changes · 350 W vs 450 W: lower power handling | + |
| Sica 10 S 3 PL | 43 = | 0.27 -0.04 | 39.9 = | 7 = | 94.5 +0.9 | close | + | |
| Faital PRO 10RS350 | 40 -3 | 0.31 = | 40.6 +0.7 | 7.17 +0.17 | 91 -2.6 | close | 4 Ω vs 8 Ω: amp load changes · 300 W vs 450 W: lower power handling | + |
| Eminence KAPPALITE™ KL3010LF-8 | 45 +2 | 0.31 = | 47.33 +7.43 | 8.52 +1.52 | 92 -1.6 | close | + | |
| Beyma 10MW/ND v2 | 49 +6 | 0.319 +0.01 | 40.7 +0.8 | 6.1 -0.9 | 94.8 +1.2 | close | 350 W vs 450 W: lower power handling · Xmax 6.1 mm < 7 mm: lower excursion-limited SPL | + |
| Beyma 10G40 v2016 | 45 +2 | 0.306 -0.01 | 49 +9.1 | 6.6 -0.4 | 94.5 +0.9 | close | Xmax 6.6 mm < 7 mm: lower excursion-limited SPL | + |
| SICA 10 S 3 PL v2017 | 43 = | 0.265 -0.05 | 39.9 = | 6.1 -0.9 | 94.5 +0.9 | close | Xmax 6.1 mm < 7 mm: lower excursion-limited SPL | + |
| Beyma 10"G40 | 45 +2 | 0.3 -0.01 | 49 +9.1 | 7 = | 95 +1.4 | close | + | |
| Ciare FXE 10-2.5 | 46 +3 | 0.358 +0.04 | 41.6 +1.7 | 6 -1 | 93.6 = | close | 300 W vs 450 W: lower power handling · Xmax 6 mm < 7 mm: lower excursion-limited SPL | + |
Comparer les 3 plus proches avec le 10 S 3 CP v2017 →
Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.