Sica 10 Fe 3 CP
Paramètres Thiele-Small
| Taille nominale | 10" |
|---|---|
| Impédance | 8 Ω |
| Fs | 52 Hz |
| Qts | 0.31 |
| Qes | 0.32 |
| Qms | 7.5 |
| Vas | 38.6 L |
| Sd | 346.4 cm² |
| Xmax | 5 mm |
| Re | 5.6 Ω |
| Bl | 15.35 T·m |
| Mms | 41.4 g |
| Pe | 450 W |
| Sensibilité | 95.9 dB |
Indication d'alignement
| EBP | 163 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 9.2 L |
EBP > 100 : favorise un alignement bass-reflex.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Candidats de substitution
| HP | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| SICA 10 FE 3 CP v2017 | 52 = | 0.307 = | 38.6 = | 4.2 -0.8 | 95.8 -0.1 | close | 350 W vs 450 W: lower power handling · Xmax 4.2 mm < 5 mm: lower excursion-limited SPL | + |
| B&C 10 PS 26 | 54 +2 | 0.296 -0.01 | 38 -0.6 | 5.5 +0.5 | 96 +0.1 | close | 350 W vs 450 W: lower power handling | + |
| B&C 10PS26 | 54 +2 | 0.29 -0.02 | 38 -0.6 | 5.5 +0.5 | 96 +0.1 | close | 350 W vs 450 W: lower power handling | + |
| Faital PRO 10PR310 | 55 +3 | 0.31 = | 40.3 +1.7 | 4.92 -0.08 | 97 +1.1 | close | 4 Ω vs 8 Ω: amp load changes · 300 W vs 450 W: lower power handling · Xmax 4.92 mm < 5 mm: lower excursion-limited SPL | + |
| Sica 10 N 3 PL | 51 -1 | 0.29 -0.02 | 40.5 +1.9 | 5.5 +0.5 | 96.1 +0.2 | close | + | |
| Beyma 10MW/ND v2 | 49 -3 | 0.319 +0.01 | 40.7 +2.1 | 6.1 +1.1 | 94.8 -1.1 | close | 350 W vs 450 W: lower power handling | + |
| Beyma 10G40 | 55 +3 | 0.314 = | 33 -5.6 | 5 = | 95.4 -0.5 | close | + | |
| SB Audience BIANCO-10MW200 | 58 +6 | 0.336 +0.03 | 39.3 +0.7 | 5.2 +0.2 | 96.2 +0.3 | close | + | |
| 18 Sound 10NW750 | 53 +1 | 0.31 = | 34 -4.6 | 7.5 +2.5 | 94 -1.9 | close | + | |
| Faital PRO 10PR310 4 Ohms | 55 +3 | 0.307 = | 35.2 -3.4 | 4.9 -0.1 | 98.5 +2.6 | close | 4 Ω vs 8 Ω: amp load changes · 300 W vs 450 W: lower power handling · Xmax 4.9 mm < 5 mm: lower excursion-limited SPL | + |
Comparer les 3 plus proches avec le 10 Fe 3 CP →
Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.