RCF NDX495
Specs HP à compression
| Throat exit | 1" |
|---|---|
| Voice coil | 44 mm |
| Impédance | 8 Ω |
| Plage utilisable | 1200-20000 Hz |
| Crossover min | 1200 Hz |
| Sensibilité (sur horn) | 109 dB |
| Aimant | neodymium |
| Poids | 0.85 kg |
| Puissance (AES) | 70 W |
Horns compatibles (même exit)
- 18 Sound XR1064 · 60°×40°
- 18 Sound XT1086 · 90°×60°
- 18 Sound XT120 · 90°×60°
- B&C ME10V3 · 90°×60°
- B&C ME20 · 90°×60°
- B&C ME45 · 90°×40°
- Beyma TD-164 · 60°×40°
- Beyma TD-8060 · 80°×60°
- Beyma TD/194 · 90°×40°
- Beyma TD1124P · 120°×40°
- Beyma TD164P · 60°×40°
- Beyma TD196P · 90°×60°
- BMS 2119 · 90°×40°
- BMS 2193 · 90°×40°
- Eminence APT 150S 7.5" X 4.5" Horn Flare · 100°×50°
- Eminence APT 80S 3.4" x 3.4" Horn Flare · 80°×80°
- Eminence APT200S 5.9" X 5.9" Horn Flare · 90°×90°
- Faital PRO LTH102 · 60°×60°
- Faital PRO STH100 · 80°×80°
- Faital PRO WG101 · 140°×140°
- Oberton H 960 · 90°×60°
- RCF H100 · 90°×75°
- RCF HF101 · 90°×70°
Matched on throat exit (1") only. Verify mounting and crossover against both datasheets.
Candidats de substitution
| HP | Min XO (Hz) | Range low (Hz) | Range high (Hz) | Voice coil (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| RCF ND340 | 1200 = | 1200 = | 20000 = | 44 = | 109 = | close | 50 W vs 70 W: lower power handling | + |
| RCF ND350 | 1200 = | 1200 = | 20000 = | 44 = | 109 = | close | 50 W vs 70 W: lower power handling | + |
| RCF ND358Y | 1200 = | 1200 = | 20000 = | 44 = | 109 = | close | 50 W vs 70 W: lower power handling | + |
| RCF NDX595 | 1200 = | 1200 = | 20000 = | 44 = | 110 +1 | close | + | |
| Faital PRO HF107 | 1300 +100 | 1300 +100 | 20000 = | 44 = | 109 = | close | 16 Ω vs 8 Ω: amp load changes · min crossover 1300 Hz > 1200 Hz: raise the XO | + |
| Faital PRO HF107 | 1300 +100 | 1300 +100 | 20000 = | 44 = | 109 = | close | min crossover 1300 Hz > 1200 Hz: raise the XO | + |
| RCF ND1710-MT3 | 1000 -200 | 1000 -200 | 20000 = | 44 = | 109 = | close | 40 W vs 70 W: lower power handling | + |
| Faital PRO HF106 | 1300 +100 | 1300 +100 | 20000 = | 44 = | 110 +1 | close | 16 Ω vs 8 Ω: amp load changes · min crossover 1300 Hz > 1200 Hz: raise the XO | + |
| Faital PRO HF106 | 1300 +100 | 1300 +100 | 20000 = | 44 = | 110 +1 | close | min crossover 1300 Hz > 1200 Hz: raise the XO | + |
| Faital PRO HF108 | 1300 +100 | 1000 -200 | 20000 = | 44 = | 109 = | close | 16 Ω vs 8 Ω: amp load changes · min crossover 1300 Hz > 1200 Hz: raise the XO | + |
Comparer les 3 plus proches avec le NDX495 →
Classé par similarité de paramètres uniquement (plancher crossover, plage, sensibilité, voice coil). Même exit requis. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.