RCF ND940
Specs HP à compression
| Throat exit | 1.4" |
|---|---|
| Voice coil | 102 mm |
| Impédance | 8 Ω |
| Plage utilisable | 500-20000 Hz |
| Crossover min | 500 Hz |
| Sensibilité (sur horn) | 110 dB |
| Aimant | neodymium |
| Poids | 2.72 kg |
| Puissance (AES) | 140 W |
Horns compatibles (même exit)
- 18 Sound PR614 · 60°×40°
- 18 Sound XR1464C · 60°×40°
- 18 Sound XR1496C · 90°×60°
- 18 Sound XT1464 · 60°×50°
- B&C ME464 · 80°×60°
- B&C ME90 · 80°×60°
- Beyma TD/365 · 60°×50°
- Beyma TD/385 · 80°×50°
- Beyma TD1464P 60 x 40 · 60°×40°
- Beyma TD1496P 90 x 60 · 90°×60°
- Faital PRO LTH142 · 60°×60°
- Faital PRO WG141 · 110°×110°
- Oberton H 1464 · 60°×40°
- RCF HF64 · 60°×40°
- RCF HF66 · 90°×40°
- RCF HF94 · 90°×40°
- RCF HF950 · 90°×50°
- RCF HF96 · 90°×60°
- RCF HF99 · 90°×90°
Matched on throat exit (1.4") only. Verify mounting and crossover against both datasheets.
Candidats de substitution
| HP | Min XO (Hz) | Range low (Hz) | Range high (Hz) | Voice coil (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| RCF ND950 1.4 | 500 = | 500 = | 20000 = | 102 = | 110 = | close | + | |
| RCF NDT995 | 500 = | 500 = | 20000 = | 102 = | 110 = | close | + | |
| RCF ND3030-T3 | 500 = | 500 = | 20000 = | 76 -26 | 109 -1 | close | 110 W vs 140 W: lower power handling | + |
| RCF ND840 | 500 = | 500 = | 20000 = | 76 -26 | 109 -1 | close | 110 W vs 140 W: lower power handling | + |
| RCF ND850 - 1.4 | 500 = | 500 = | 20000 = | 76 -26 | 109 -1 | close | 110 W vs 140 W: lower power handling | + |
| RCF ND858Y 1.4 | 500 = | 500 = | 20000 = | 76 -26 | 109 -1 | close | 110 W vs 140 W: lower power handling | + |
| RCF NDT895 | 500 = | 500 = | 20000 = | 76 -26 | 109 -1 | close | + | |
| Celestion CDX14-3035 | 500 = | 500 = | 20000 = | 75 -27 | 108 -2 | close | + | |
| Radian 951 | 600 +100 | 500 = | 20000 = | 101.6 -0.4 | 111.5 +1.5 | close | 16 Ω vs 8 Ω: amp load changes · min crossover 600 Hz > 500 Hz: raise the XO | + |
| Radian 951 | 600 +100 | 500 = | 20000 = | 101.6 -0.4 | 111.5 +1.5 | close | min crossover 600 Hz > 500 Hz: raise the XO | + |
Comparer les 3 plus proches avec le ND940 →
Classé par similarité de paramètres uniquement (plancher crossover, plage, sensibilité, voice coil). Même exit requis. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.