Monacor SPH-250CTC
Paramètres Thiele-Small
| Taille nominale | 10" |
|---|---|
| Impédance | 4 Ω |
| Fs | 20 Hz |
| Qts | 0.247 |
| Qes | 0.26 |
| Qms | 5.12 |
| Vas | 220 L |
| Sd | 343 cm² |
| Xmax | 4.5 mm |
| Re | 3.4 Ω |
| Bl | 8.8 T·m |
| Mms | 47.5 g |
| Pe | 100 W |
| Sensibilité | 94 dB |
Indication d'alignement
| EBP | 77 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 30.6 L |
EBP 50-100 : fonctionne en clos ou en bass-reflex.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Candidats de substitution
| HP | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| Monacor SPH-250CTC vp CARBON | 20 = | 0.247 = | 220 = | 7.5 +3 | 94 = | close | + | |
| Ciare HS250 | 19 -1 | 0.242 -0.01 | 194 -26 | 8 +3.5 | 93.6 -0.4 | close | 70 W vs 100 W: lower power handling | + |
| Accuton S280-6-282 | 20 = | 0.263 +0.02 | 226 +6 | 6 +1.5 | 90.9 -3.1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Monacor SPH-255 | 23 +3 | 0.238 -0.01 | 205 -15 | 4.5 = | 93 -1 | close | 8 Ω vs 4 Ω: amp load changes · 60 W vs 100 W: lower power handling | + |
| Focal 10L 6411 | 22.4 +2.4 | 0.253 +0.01 | 210.4 -9.6 | 8 +3.5 | 93.5 -0.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Focal 10N 501 | 21.8 +1.8 | 0.231 -0.02 | 212.7 -7.3 | 6 +1.5 | 92.5 -1.5 | close | 8 Ω vs 4 Ω: amp load changes · 60 W vs 100 W: lower power handling | + |
| Focal 10N510 | 21.8 +1.8 | 0.231 -0.02 | 212.7 -7.3 | 6 +1.5 | 92.5 -1.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Philips AD10240/W8 | 23 +3 | 0.261 +0.01 | 248.2 +28.2 | 7.8 +3.3 | 93.6 -0.4 | close | 8 Ω vs 4 Ω: amp load changes · 60 W vs 100 W: lower power handling | + |
| Audax PR240M6 v2014 | 25 +5 | 0.26 +0.01 | 207 -13 | 4 -0.5 | 94.1 +0.1 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 4 mm < 4.5 mm: lower excursion-limited SPL | + |
| Accuton AS250-4-552-vp | 20 = | 0.247 = | 162.4 -57.6 | 9 +4.5 | 92.6 -1.4 | close | + |
Comparer les 3 plus proches avec le SPH-250CTC →
Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.