LaVoce DN10.172M
Specs HP à compression
| Throat exit | 1" |
|---|---|
| Voice coil | 44.4 mm |
| Impédance | 8 Ω |
| Plage utilisable | 1200-20000 Hz |
| Crossover min | 1500 Hz |
| Sensibilité (sur horn) | 109 dB |
| Puissance (AES) | 50 W |
Horns compatibles (même exit)
- 18 Sound XR1064 · 60°×40°
- 18 Sound XT1086 · 90°×60°
- 18 Sound XT120 · 90°×60°
- B&C ME10V3 · 90°×60°
- B&C ME20 · 90°×60°
- B&C ME45 · 90°×40°
- Beyma TD-164 · 60°×40°
- Beyma TD-8060 · 80°×60°
- Beyma TD/194 · 90°×40°
- Beyma TD1124P · 120°×40°
- Beyma TD164P · 60°×40°
- Beyma TD196P · 90°×60°
- BMS 2119 · 90°×40°
- BMS 2193 · 90°×40°
- Eminence APT 150S 7.5" X 4.5" Horn Flare · 100°×50°
- Eminence APT 80S 3.4" x 3.4" Horn Flare · 80°×80°
- Eminence APT200S 5.9" X 5.9" Horn Flare · 90°×90°
- Faital PRO LTH102 · 60°×60°
- Faital PRO STH100 · 80°×80°
- Faital PRO WG101 · 140°×140°
- Oberton H 960 · 90°×60°
- RCF H100 · 90°×75°
- RCF HF101 · 90°×70°
Matched on throat exit (1") only. Verify mounting and crossover against both datasheets.
Candidats de substitution
| HP | Min XO (Hz) | Range low (Hz) | Range high (Hz) | Voice coil (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| B&C DE250 | 1500 = | 1200 = | 20000 = | 44.4 = | 108 -1 | close | + | |
| LaVoce DN10.172K | 1500 = | 1200 = | 20000 = | 44.4 = | 110 +1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| LaVoce DN10.172K | 1500 = | 1200 = | 20000 = | 44.4 = | 110 +1 | close | + | |
| LaVoce DN10.172KS | 1500 = | 1200 = | 20000 = | 44.4 = | 110 +1 | close | + | |
| RCF ND340 | 1200 -300 | 1200 = | 20000 = | 44 -0.4 | 109 = | close | + | |
| RCF ND350 | 1200 -300 | 1200 = | 20000 = | 44 -0.4 | 109 = | close | + | |
| RCF ND358Y | 1200 -300 | 1200 = | 20000 = | 44 -0.4 | 109 = | close | + | |
| RCF NDX495 | 1200 -300 | 1200 = | 20000 = | 44 -0.4 | 109 = | close | + | |
| Faital PRO HF107 | 1300 -200 | 1300 +100 | 20000 = | 44 -0.4 | 109 = | close | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO HF107 | 1300 -200 | 1300 +100 | 20000 = | 44 -0.4 | 109 = | close | + |
Comparer les 3 plus proches avec le DN10.172M →
Classé par similarité de paramètres uniquement (plancher crossover, plage, sensibilité, voice coil). Même exit requis. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.