← tous les HP

LaVoce DN10.142

1" exit · 16 Ω · 25 W · 107 dB · datasheet ↗

Specs HP à compression

Throat exit1"
Voice coil36 mm
Impédance16 Ω
Plage utilisable1000-18000 Hz
Crossover min1200 Hz
Sensibilité (sur horn)107 dB
Puissance (AES)25 W

Horns compatibles (même exit)

Matched on throat exit (1") only. Verify mounting and crossover against both datasheets.

Candidats de substitution

HPMin XO (Hz)Range low (Hz)Range high (Hz)Voice coil (mm)Sens (dB)AdéquationNotesComparer
LaVoce DN10.1421200 =1000 =18000 =36 =107 =close8 Ω vs 16 Ω: amp load changes+
B&C DE1111200 =1000 =17000 -100036 =107 =close8 Ω vs 16 Ω: amp load changes+
B&C DE1111200 =1000 =17000 -100036 =108.5 +1.5close+
LaVoce DF10.144LK1200 =1000 =20000 +200035 -1106 -1close+
LaVoce DF10.144LK1200 =1000 =20000 +200035 -1106 -1close8 Ω vs 16 Ω: amp load changes+
B&C DH3501000 -2001000 =17000 -100036 =108 +1close4 Ω vs 16 Ω: amp load changes · 15 W vs 25 W: lower power handling+
B&C DH3501000 -2001000 =17000 -100036 =108 +1close8 Ω vs 16 Ω: amp load changes · 15 W vs 25 W: lower power handling+
B&C DH350H1000 -2001000 =17000 -100036 =108 +1close4 Ω vs 16 Ω: amp load changes+
B&C DH350H1000 -2001000 =17000 -100036 =108 +1close8 Ω vs 16 Ω: amp load changes+
B&C DH3501000 -2001000 =17000 -100036 =109.5 +2.5close15 W vs 25 W: lower power handling+

Comparer les 3 plus proches avec le DN10.142 →

Classé par similarité de paramètres uniquement (plancher crossover, plage, sensibilité, voice coil). Même exit requis. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.

Utilisé dans les caissons (0)

No enclosure in the catalog uses this driver yet.