Faital PRO 6FE400
Paramètres Thiele-Small
| Taille nominale | 6" |
|---|---|
| Impédance | 4 Ω |
| Fs | 100 Hz |
| Qts | 0.36 |
| Qes | 0.39 |
| Qms | 3.8 |
| Vas | 4.9 L |
| Sd | 141 cm² |
| Xmax | 4.87 mm |
| Re | 3.4 Ω |
| Mms | 14.2 g |
| Pe | 200 W |
| Sensibilité | 93 dB |
Indication d'alignement
| EBP | 256 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 1.7 L |
EBP > 100 : favorise un alignement bass-reflex.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Candidats de substitution
| HP | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 6FE400 | 100 = | 0.36 = | 5 +0.1 | 4.77 -0.1 | 94 +1 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 4.77 mm < 4.87 mm: lower excursion-limited SPL | + |
| LaVoce WSN061.52-4 | 90 -10 | 0.37 +0.01 | 5.15 +0.25 | 4 -0.87 | 92.5 -0.5 | close | 125 W vs 200 W: lower power handling · Xmax 4 mm < 4.87 mm: lower excursion-limited SPL | + |
| Faital PRO 6FE300 | 98 -2 | 0.41 +0.05 | 4.4 -0.5 | 3.9 -0.97 | 92 -1 | usable | Xmax 3.9 mm < 4.87 mm: lower excursion-limited SPL | + |
| Faital PRO 6PR160 | 90 -10 | 0.33 -0.03 | 5.9 +1 | 5 +0.13 | 95 +2 | usable | 8 Ω vs 4 Ω: amp load changes · 120 W vs 200 W: lower power handling | + |
| Faital PRO 6FE300 | 100 = | 0.46 +0.1 | 4.7 -0.2 | 3.9 -0.97 | 94 +1 | usable | 8 Ω vs 4 Ω: amp load changes · Xmax 3.9 mm < 4.87 mm: lower excursion-limited SPL | + |
| LaVoce MAN062.00-16 | 103 +3 | 0.34 -0.02 | 3.77 -1.13 | 3.9 -0.97 | 94.5 +1.5 | usable | 16 Ω vs 4 Ω: amp load changes · Xmax 3.9 mm < 4.87 mm: lower excursion-limited SPL | + |
| Faital PRO 6FE400 | 100 = | 0.5 +0.14 | 5.5 +0.6 | 4.77 -0.1 | 94 +1 | usable | 16 Ω vs 4 Ω: amp load changes · Xmax 4.77 mm < 4.87 mm: lower excursion-limited SPL | + |
| LaVoce WSN061.52 | 90 -10 | 0.39 +0.03 | 5.92 +1.02 | 3.8 -1.07 | 94 +1 | usable | 8 Ω vs 4 Ω: amp load changes · 125 W vs 200 W: lower power handling · Xmax 3.8 mm < 4.87 mm: lower excursion-limited SPL | + |
| Faital PRO 6FE200 | 120 +20 | 0.42 +0.06 | 4.3 -0.6 | 4.62 -0.25 | 95 +2 | usable | 130 W vs 200 W: lower power handling · Xmax 4.62 mm < 4.87 mm: lower excursion-limited SPL | + |
| Faital PRO 6PR150 | 100 = | 0.34 -0.02 | 4.9 = | 2.65 -2.22 | 97 +4 | usable | 8 Ω vs 4 Ω: amp load changes · 150 W vs 200 W: lower power handling · Xmax 2.65 mm < 4.87 mm: lower excursion-limited SPL | + |
Comparer les 3 plus proches avec le 6FE400 →
Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.