Eminence KAPPA PRO 10
Paramètres Thiele-Small
| Taille nominale | 10" |
|---|---|
| Impédance | 8 Ω |
| Fs | 46 Hz |
| Qts | 0.196 |
| Qes | 0.2 |
| Qms | 10.1 |
| Vas | 52.2 L |
| Sd | 344.9 cm² |
| Xmax | 3.2 mm |
| Re | 6.5 Ω |
| Bl | 19 T·m |
| Mms | 38.2 g |
| Pe | 500 W |
| Sensibilité | 96.9 dB |
Indication d'alignement
| EBP | 230 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 4.3 L |
EBP > 100 : favorise un alignement bass-reflex.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Candidats de substitution
| HP | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| Eminence KAPPA PRO 10 A | 46 = | 0.196 = | 52.2 = | 3.2 = | 96.9 = | close | + | |
| Eminence Kappa Pro-10A | 46 = | 0.2 = | 52.2 = | 3.2 = | 97 +0.1 | close | + | |
| Beyma 10"MI100 | 50 +4 | 0.21 +0.01 | 54 +1.8 | 4.5 +1.3 | 98 +1.1 | close | 350 W vs 500 W: lower power handling | + |
| Beyma 10MI100 v2017 | 50 +4 | 0.213 +0.02 | 54 +1.8 | 4.5 +1.3 | 97.9 +1 | close | 350 W vs 500 W: lower power handling | + |
| Eminence KAPPALITE 3010 MB | 50.7 +4.7 | 0.204 +0.01 | 52.1 -0.1 | 5 +1.8 | 99.1 +2.2 | close | + | |
| Warehouse Sound WGS 12L | 49.6 +3.6 | 0.242 +0.05 | 50.5 -1.7 | 3.3 +0.1 | 97.3 +0.4 | close | 200 W vs 500 W: lower power handling | + |
| David Eden EC1060XL8 | 49.6 +3.6 | 0.207 +0.01 | 55.5 +3.3 | 2.4 -0.8 | 98.8 +1.9 | usable | 150 W vs 500 W: lower power handling · Xmax 2.4 mm < 3.2 mm: lower excursion-limited SPL | + |
| Beyma 10G200 | 45 -1 | 0.251 +0.05 | 56.1 +3.9 | 4.5 +1.3 | 96.2 -0.7 | usable | 200 W vs 500 W: lower power handling | + |
| Beyma 10M250 | 50 +4 | 0.214 +0.02 | 64 +11.8 | 3.5 +0.3 | 99 +2.1 | usable | 250 W vs 500 W: lower power handling | + |
| Faital PRO 10PR300 | 50 +4 | 0.24 +0.04 | 49.8 -2.4 | 4.92 +1.72 | 96 -0.9 | usable | 4 Ω vs 8 Ω: amp load changes · 300 W vs 500 W: lower power handling | + |
Comparer les 3 plus proches avec le KAPPA PRO 10 →
Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.