Dayton Audio UM10-22 10
Paramètres Thiele-Small
| Taille nominale | 10" |
|---|---|
| Impédance | 4 Ω |
| Fs | 26.2 Hz |
| Qts | 0.458 |
| Qes | 0.54 |
| Qms | 3.03 |
| Vas | 35.1 L |
| Sd | 327.8 cm² |
| Xmax | 10.9 mm |
| Re | 3 Ω |
| Bl | 12 T·m |
| Mms | 158.4 g |
| Pe | 500 W |
| Sensibilité | 86.9 dB |
Indication d'alignement
| EBP | 49 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 25.4 L |
EBP < 50 : favorise un alignement clos.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Candidats de substitution
| HP | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| JL Audio 10W6V2-D4 | 28.5 +2.3 | 0.469 +0.01 | 33.4 -1.7 | 11.9 +1 | 84.9 -2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| JL Audio 10W1V3-4 | 26.15 -0.05 | 0.446 -0.01 | 43.41 +8.31 | 11 +0.1 | 84.2 -2.7 | close | 300 W vs 500 W: lower power handling | + |
| Infinity REFERENCE 1060W | 29 +2.8 | 0.42 -0.04 | 32.9 -2.2 | 13.0048 +2.1 | 88 +1.1 | close | 275 W vs 500 W: lower power handling | + |
| Dayton Audio RSS265HF-4 v2012 | 26.2 = | 0.441 -0.02 | 45 +9.9 | 9.4 -1.5 | 87.8 +0.9 | close | 350 W vs 500 W: lower power handling · Xmax 9.4 mm < 10.9 mm: lower excursion-limited SPL | + |
| Dayton Audio TS280D-4 | 25.6 -0.6 | 0.404 -0.05 | 33.7 -1.4 | 8.3 -2.6 | 87.1 +0.2 | close | 300 W vs 500 W: lower power handling · Xmax 8.3 mm < 10.9 mm: lower excursion-limited SPL | + |
| Infinity KAPPA PERFECT 10.1 | 28.35 +2.15 | 0.42 -0.04 | 38.511 +3.41 | 14.15 +3.25 | 84.8 -2.1 | close | 350 W vs 500 W: lower power handling | + |
| Infinity 1030W | 29.62 +3.42 | 0.39 -0.07 | 35.72 +0.62 | 12.25 +1.35 | 88 +1.1 | close | 250 W vs 500 W: lower power handling | + |
| JL Audio 10W1V3-2 | 25.23 -0.97 | 0.436 -0.02 | 44.15 +9.05 | 11 +0.1 | 83.9 -3 | usable | 2 Ω vs 4 Ω: amp load changes · 300 W vs 500 W: lower power handling | + |
| Brax BRAX MATRIX ML10 | 35 +8.8 | 0.46 = | 40 +4.9 | 12.5 +1.6 | 87.3 +0.4 | usable | + | |
| JL Audio 10W3V3-4 | 31.5 +5.3 | 0.485 +0.03 | 32.23 -2.87 | 14 +3.1 | 84.87 -2.03 | usable | + |
Comparer les 3 plus proches avec le UM10-22 10 →
Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.