Conrad DS-100i
Paramètres Thiele-Small
| Taille nominale | 10" |
|---|---|
| Impédance | 4 Ω |
| Fs | 22.5 Hz |
| Qts | 0.188 |
| Qes | 0.2 |
| Qms | 3.13 |
| Vas | 112.2 L |
| Sd | 346 cm² |
| Xmax | 1.5 mm |
| Re | 3.56 Ω |
| Bl | 13.7 T·m |
| Mms | 74.9 g |
| Pe | 100 W |
| Sensibilité | 93.6 dB |
Indication d'alignement
| EBP | 113 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 8.5 L |
EBP > 100 : favorise un alignement bass-reflex.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Candidats de substitution
| HP | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| JBL LE111A | 25 +2.5 | 0.175 -0.01 | 101.9 -10.3 | 4.8 +3.3 | 92.9 -0.7 | usable | 8 Ω vs 4 Ω: amp load changes · 75 W vs 100 W: lower power handling | + |
| JBL 2121 | 35 +12.5 | 0.193 +0.01 | 110.4 -1.8 | 1.5 = | 96.4 +2.8 | usable | 8 Ω vs 4 Ω: amp load changes · 50 W vs 100 W: lower power handling | + |
| Focal 10C 012-DB | 26.3 +3.8 | 0.238 +0.05 | 134.7 +22.5 | 2.5 +1 | 93.8 +0.2 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| ATC SB75-234 LC | 26 +3.5 | 0.224 +0.04 | 120 +7.8 | 5 +3.5 | 91.8 -1.8 | usable | 8 Ω vs 4 Ω: amp load changes · 75 W vs 100 W: lower power handling | + |
| Audax PR240Z2 | 25 +2.5 | 0.261 +0.07 | 112 -0.2 | 5 +3.5 | 94.1 +0.5 | usable | + | |
| Focal 10C 012DB | 26.3 +3.8 | 0.247 +0.06 | 135 +22.8 | 2.5 +1 | 93.6 = | usable | 8 Ω vs 4 Ω: amp load changes | + |
| ATC PA75-234 BLCR | 27 +4.5 | 0.181 -0.01 | 79 -33.2 | 4 +2.5 | 92.3 -1.3 | usable | 8 Ω vs 4 Ω: amp load changes · 75 W vs 100 W: lower power handling | + |
| Fostex FW 250 | 23 +0.5 | 0.225 +0.04 | 150 +37.8 | 4.5 +3 | 91.8 -1.8 | usable | 8 Ω vs 4 Ω: amp load changes · 50 W vs 100 W: lower power handling | + |
| Audiotechnology 10C772510KAP | 25 +2.5 | 0.24 +0.05 | 110 -2.2 | 8.6 +7.1 | 92.1 -1.5 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Klipsch K1089-AV | 31 +8.5 | 0.216 +0.03 | 106.2 -6 | 4.4 +2.9 | 94.8 +1.2 | usable | 8 Ω vs 4 Ω: amp load changes | + |
Comparer les 3 plus proches avec le DS-100i →
Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.