Beyma 6"MCF200Nd
Paramètres Thiele-Small
| Taille nominale | 6.5" |
|---|---|
| Impédance | 8 Ω |
| Fs | 406 Hz |
| Qts | 0.72 |
| Qes | 0.77 |
| Qms | 10.3 |
| Vas | 0.27 L |
| Sd | 140 cm² |
| Xmax | 2.5 mm |
| Re | 6.2 Ω |
| Bl | 18.1 T·m |
| Mms | 15 g |
| Pe | 200 W |
| Sensibilité | 97 dB |
Indication d'alignement
| EBP | 527 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | Qts too high |
EBP > 100 : favorise un alignement bass-reflex.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Candidats de substitution
| HP | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| B&C 6NSM51 | 280 -126 | 0.6 -0.12 | 0.7 +0.43 | 2.8 +0.3 | 100 +3 | risky | + | |
| B&C 6MD38 | 150 -256 | 0.5 -0.22 | 2.3 +2.03 | 3.5 +1 | 95 -2 | risky | 16 Ω vs 8 Ω: amp load changes · 120 W vs 200 W: lower power handling | + |
| B&C 6MDN44 | 138 -268 | 0.47 -0.25 | 2.8 +2.53 | 3 +0.5 | 97 = | risky | 16 Ω vs 8 Ω: amp load changes | + |
| B&C 6MDN44 | 140 -266 | 0.4 -0.32 | 2.7 +2.43 | 2.5 = | 96.5 -0.5 | risky | + | |
| Beyma 6"MI100 | 128 -278 | 0.51 -0.21 | 3.1 +2.83 | 3 +0.5 | 94 -3 | risky | + | |
| B&C 6MD38 | 130 -276 | 0.44 -0.28 | 3 +2.73 | 2 -0.5 | 96 -1 | risky | 120 W vs 200 W: lower power handling · Xmax 2 mm < 2.5 mm: lower excursion-limited SPL | + |
| Oberton 6NM150 | 124 -282 | 0.377 -0.34 | 4 +3.73 | 2.25 -0.25 | 97 = | risky | 150 W vs 200 W: lower power handling · Xmax 2.25 mm < 2.5 mm: lower excursion-limited SPL | + |
| 18 Sound 6ND410 | 149 -257 | 0.48 -0.24 | 6.2 +5.93 | 2 -0.5 | 102 +5 | risky | 16 Ω vs 8 Ω: amp load changes · Xmax 2 mm < 2.5 mm: lower excursion-limited SPL | + |
| B&C 6MBX44 | 115 -291 | 0.35 -0.37 | 4 +3.73 | 3.5 +1 | 98 +1 | risky | 16 Ω vs 8 Ω: amp load changes | + |
| Oberton 6M150 | 115.1 -290.9 | 0.422 -0.3 | 5.35 +5.08 | 2.25 -0.25 | 96 -1 | risky | 150 W vs 200 W: lower power handling · Xmax 2.25 mm < 2.5 mm: lower excursion-limited SPL | + |
Comparer les 3 plus proches avec le 6"MCF200Nd →
Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.