Beyma 10MCS 500
Paramètres Thiele-Small
| Taille nominale | 10" |
|---|---|
| Impédance | 8 Ω |
| Fs | 65 Hz |
| Qts | 0.31 |
| Qes | 0.33 |
| Qms | 10.1 |
| Vas | 24 L |
| Sd | 350 cm² |
| Xmax | 8 mm |
| Re | 5.6 Ω |
| Bl | 17.6 T·m |
| Mms | 44 g |
| Pe | 500 W |
| Sensibilité | 96.5 dB |
Indication d'alignement
| EBP | 197 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 5.7 L |
EBP > 100 : favorise un alignement bass-reflex.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Candidats de substitution
| HP | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| Beyma 10MC500 | 65 = | 0.29 -0.02 | 24 = | 8 = | 97 +0.5 | close | + | |
| 18 Sound 10NTLW2500 | 65 = | 0.33 +0.02 | 21 -3 | 7.6 -0.4 | 96.5 = | close | Xmax 7.6 mm < 8 mm: lower excursion-limited SPL | + |
| Faital PRO 10FH520 | 60 -5 | 0.29 -0.02 | 23.5 -0.5 | 7.25 -0.75 | 97 +0.5 | close | Xmax 7.25 mm < 8 mm: lower excursion-limited SPL | + |
| Faital PRO 10FH520 | 60 -5 | 0.32 +0.01 | 22.7 -1.3 | 7.25 -0.75 | 95 -1.5 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 7.25 mm < 8 mm: lower excursion-limited SPL | + |
| 18 Sound 10NTLW2500 | 61 -4 | 0.27 -0.04 | 22 -2 | 7.6 -0.4 | 96.5 = | close | 4 Ω vs 8 Ω: amp load changes · Xmax 7.6 mm < 8 mm: lower excursion-limited SPL | + |
| B&C 10CXN64 | 68 +3 | 0.31 = | 23 -1 | 5.5 -2.5 | 95.2 -1.3 | close | 250 W vs 500 W: lower power handling · Xmax 5.5 mm < 8 mm: lower excursion-limited SPL | + |
| B&C 10CL64 | 63 -2 | 0.31 = | 22.2 -1.8 | 5.2 -2.8 | 96 -0.5 | close | 250 W vs 500 W: lower power handling · Xmax 5.2 mm < 8 mm: lower excursion-limited SPL | + |
| 18 Sound 10MB600 | 64 -1 | 0.33 +0.02 | 27.6 +3.6 | 6.5 -1.5 | 98 +1.5 | close | 16 Ω vs 8 Ω: amp load changes · Xmax 6.5 mm < 8 mm: lower excursion-limited SPL | + |
| Faital PRO 10FH500 | 60 -5 | 0.26 -0.05 | 25.8 +1.8 | 7.5 -0.5 | 96 -0.5 | close | Xmax 7.5 mm < 8 mm: lower excursion-limited SPL | + |
| Faital PRO 10FH530 | 60 -5 | 0.25 -0.06 | 23.5 -0.5 | 7.5 -0.5 | 97 +0.5 | usable | Xmax 7.5 mm < 8 mm: lower excursion-limited SPL | + |
Comparer les 3 plus proches avec le 10MCS 500 →
Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.