Beyma 10MCB700
Paramètres Thiele-Small
| Taille nominale | 10" |
|---|---|
| Impédance | 8 Ω |
| Fs | 75 Hz |
| Qts | 0.33 |
| Qes | 0.35 |
| Qms | 4.9 |
| Vas | 13.2 L |
| Sd | 350 cm² |
| Xmax | 7 mm |
| Re | 5.3 Ω |
| Bl | 20.1 T·m |
| Mms | 55 g |
| Pe | 700 W |
| Sensibilité | 96 dB |
Indication d'alignement
| EBP | 214 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 3.7 L |
EBP > 100 : favorise un alignement bass-reflex.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Candidats de substitution
| HP | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| B&C 10NDL88 | 67 -8 | 0.32 -0.01 | 15.6 +2.4 | 7.8 +0.8 | 95.5 -0.5 | close | 16 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 10NTLW3500 | 65 -10 | 0.35 +0.02 | 16 +2.8 | 7.9 +0.9 | 95 -1 | usable | + | |
| B&C 10CLA76 | 71 -4 | 0.29 -0.04 | 16.4 +3.2 | 6.5 -0.5 | 96.5 +0.5 | usable | 400 W vs 700 W: lower power handling · Xmax 6.5 mm < 7 mm: lower excursion-limited SPL | + |
| 18 Sound 10NTLW2500 | 65 -10 | 0.33 = | 21 +7.8 | 7.6 +0.6 | 96.5 +0.5 | usable | 500 W vs 700 W: lower power handling | + |
| B&C 10NW76 | 68 -7 | 0.29 -0.04 | 18.5 +5.3 | 7 = | 96.8 +0.8 | usable | 16 Ω vs 8 Ω: amp load changes · 400 W vs 700 W: lower power handling | + |
| Faital PRO 10FH530 | 67 -8 | 0.39 +0.06 | 20.2 +7 | 7.45 +0.45 | 96 = | usable | 16 Ω vs 8 Ω: amp load changes · 500 W vs 700 W: lower power handling | + |
| B&C 10NW76 | 67 -8 | 0.26 -0.07 | 17.6 +4.4 | 6.8 -0.2 | 96.5 +0.5 | usable | 400 W vs 700 W: lower power handling · Xmax 6.8 mm < 7 mm: lower excursion-limited SPL | + |
| 18 Sound 10NTLW2500 | 66 -9 | 0.39 +0.06 | 20.9 +7.7 | 7.6 +0.6 | 96 = | usable | 16 Ω vs 8 Ω: amp load changes · 500 W vs 700 W: lower power handling | + |
| Beyma 10MCS 500 | 65 -10 | 0.31 -0.02 | 24 +10.8 | 8 +1 | 96.5 +0.5 | usable | 500 W vs 700 W: lower power handling | + |
| Faital PRO 10FH520 | 60 -15 | 0.32 -0.01 | 22.7 +9.5 | 7.25 +0.25 | 95 -1 | usable | 4 Ω vs 8 Ω: amp load changes | + |
Comparer les 3 plus proches avec le 10MCB700 →
Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.