Beyma 10LW30/N

10" · 8 Ω · 450 W · 94.2 dB · datasheet ↗

Paramètres Thiele-Small

Taille nominale	10"
Impédance	8 Ω
Fs	38 Hz
Qts	0.234
Qes	0.24
Qms	9.9
Vas	56 L
Sd	350 cm²
Xmax	7 mm
Re	6.1 Ω
Bl	18.1 T·m
Mms	53.8 g
Pe	450 W
Sensibilité	94.2 dB

Indication d'alignement

EBP	158 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 6.9 L

EBP > 100 : favorise un alignement bass-reflex.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Candidats de substitution

HP	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Adéquation	Notes	Comparer
AE Speakers TD10M-8	40.1 +2.1	0.238 =	59.2 +3.2	6 -1	94.5 +0.3	close	Xmax 6 mm < 7 mm: lower excursion-limited SPL	+
AE Speakers TD10M	40.6 +2.6	0.235 =	59.1 +3.1	6 -1	94.7 +0.5	close	Xmax 6 mm < 7 mm: lower excursion-limited SPL	+
Eminence KAPPALITE 3010LF-4	40 +2	0.251 +0.02	53.5 -2.5	8.1 +1.1	96.4 +2.2	close	4 Ω vs 8 Ω: amp load changes	+
Eminence KAPPALITE 3010 LF	38.7 +0.7	0.273 +0.04	62.4 +6.4	8.5 +1.5	93.5 -0.7	close		+
Beyma 10LW30	42 +4	0.293 +0.06	55 -1	7 =	94.6 +0.4	close		+
AE Speakers TD10X	35 -3	0.27 +0.04	67.5 +11.5	7 =	92.4 -1.8	usable		+
Eminence KAPPA PRO 10 LF	39 +1	0.281 +0.05	73 +17	7.2 +0.2	95.4 +1.2	usable		+
Beyma 10WRS300	41 +3	0.276 +0.04	66.5 +10.5	5.8 -1.2	95.1 +0.9	usable	300 W vs 450 W: lower power handling · Xmax 5.8 mm < 7 mm: lower excursion-limited SPL	+
Volt BM2500.4	32 -6	0.213 -0.02	73 +17	6.6 -0.4	93.3 -0.9	usable	200 W vs 450 W: lower power handling · Xmax 6.6 mm < 7 mm: lower excursion-limited SPL	+
Eminence Kappa Pro-10LF	39 +1	0.28 +0.05	72.97 +16.97	7.2 +0.2	91.6 -2.6	usable		+

Comparer les 3 plus proches avec le 10LW30/N →

Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.

Utilisé dans les caissons (0)

No enclosure in the catalog uses this driver yet.