Beyma 10G40
Paramètres Thiele-Small
| Taille nominale | 10" |
|---|---|
| Impédance | 8 Ω |
| Fs | 55 Hz |
| Qts | 0.314 |
| Qes | 0.33 |
| Qms | 6.47 |
| Vas | 33 L |
| Sd | 380 cm² |
| Xmax | 5 mm |
| Re | 6 Ω |
| Bl | 18 T·m |
| Mms | 51.4 g |
| Pe | 400 W |
| Sensibilité | 95.4 dB |
Indication d'alignement
| EBP | 167 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 8.1 L |
EBP > 100 : favorise un alignement bass-reflex.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Candidats de substitution
| HP | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| PRV Audio 10MR1000 | 59.2 +4.2 | 0.323 +0.01 | 31 -2 | 5 = | 95.4 = | close | + | |
| Volt B250.2 PA | 50 -5 | 0.314 = | 33 = | 4.6 -0.4 | 94.4 -1 | close | 250 W vs 400 W: lower power handling · Xmax 4.6 mm < 5 mm: lower excursion-limited SPL | + |
| 18 Sound 10NW750 | 53 -2 | 0.31 = | 34 +1 | 7.5 +2.5 | 94 -1.4 | close | + | |
| Celestion NTR10-2520E | 56 +1 | 0.312 = | 30 -3 | 4.75 -0.25 | 93.7 -1.7 | close | 250 W vs 400 W: lower power handling · Xmax 4.75 mm < 5 mm: lower excursion-limited SPL | + |
| Sica 10 Fe 3 CP | 52 -3 | 0.31 = | 38.6 +5.6 | 5 = | 95.9 +0.5 | close | + | |
| Faital PRO 10PR310 4 Ohms | 55 = | 0.307 -0.01 | 35.2 +2.2 | 4.9 -0.1 | 98.5 +3.1 | close | 4 Ω vs 8 Ω: amp load changes · 300 W vs 400 W: lower power handling · Xmax 4.9 mm < 5 mm: lower excursion-limited SPL | + |
| B&C 10 PS 26 | 54 -1 | 0.296 -0.02 | 38 +5 | 5.5 +0.5 | 96 +0.6 | close | + | |
| Faital PRO 10PR330 | 60 +5 | 0.33 +0.02 | 32.5 -0.5 | 7.37 +2.37 | 96 +0.6 | close | 300 W vs 400 W: lower power handling | + |
| Beyma 10LW30/N v2017 | 55 = | 0.29 -0.02 | 28 -5 | 5.1 +0.1 | 95 -0.4 | close | + | |
| Faital PRO 10PR310 | 55 = | 0.31 = | 40.3 +7.3 | 4.92 -0.08 | 97 +1.6 | close | 4 Ω vs 8 Ω: amp load changes · 300 W vs 400 W: lower power handling · Xmax 4.92 mm < 5 mm: lower excursion-limited SPL | + |
Comparer les 3 plus proches avec le 10G40 →
Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.