B&C 15 TBW 100
Paramètres Thiele-Small
| Taille nominale | 15" |
|---|---|
| Impédance | 8 Ω |
| Fs | 39 Hz |
| Qts | 0.307 |
| Qes | 0.33 |
| Qms | 4.4 |
| Vas | 96 L |
| Sd | 855 cm² |
| Xmax | 8.4 mm |
| Re | 5 Ω |
| Bl | 25.7 T·m |
| Mms | 177.8 g |
| Pe | 1500 W |
| Sensibilité | 96.4 dB |
Indication d'alignement
| EBP | 118 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 22.3 L |
EBP > 100 : favorise un alignement bass-reflex.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Candidats de substitution
| HP | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| B&C 15TBW100 | 39 = | 0.31 = | 96 = | 12 +3.6 | 96 -0.4 | close | + | |
| B&C 15 TBX 100 v2013 | 39 = | 0.307 = | 96 = | 6.9 -1.5 | 96.4 = | close | 1000 W vs 1500 W: lower power handling · Xmax 6.9 mm < 8.4 mm: lower excursion-limited SPL | + |
| Faital PRO 15HP1060 | 40 +1 | 0.31 = | 100.3 +4.3 | 12.45 +4.05 | 97 +0.6 | close | 1000 W vs 1500 W: lower power handling | + |
| LaVoce WAF154.00 | 38 -1 | 0.294 -0.01 | 103 +7 | 9 +0.6 | 96 -0.4 | close | + | |
| Faital PRO 15HP1030 | 40 +1 | 0.3 -0.01 | 88.3 -7.7 | 12.45 +4.05 | 96 -0.4 | close | 4 Ω vs 8 Ω: amp load changes · 1000 W vs 1500 W: lower power handling | + |
| Oberton 15NXB1000 | 38.34 -0.66 | 0.283 -0.02 | 105.5 +9.5 | 9 +0.6 | 97 +0.6 | close | 1000 W vs 1500 W: lower power handling | + |
| Faital PRO 15HP1030 | 40 +1 | 0.34 +0.03 | 95 -1 | 12.45 +4.05 | 96 -0.4 | close | 1000 W vs 1500 W: lower power handling | + |
| B&C 15PZB100 | 39 = | 0.29 -0.02 | 110 +14 | 8 -0.4 | 97 +0.6 | close | 700 W vs 1500 W: lower power handling · Xmax 8 mm < 8.4 mm: lower excursion-limited SPL | + |
| Faital PRO 15XL1400 | 38 -1 | 0.33 +0.02 | 91.2 -4.8 | 12.92 +4.52 | 96 -0.4 | close | + | |
| Faital PRO 15XL1400 | 38 -1 | 0.3 -0.01 | 84.3 -11.7 | 12.92 +4.52 | 96 -0.4 | close | 4 Ω vs 8 Ω: amp load changes | + |
Comparer les 3 plus proches avec le 15 TBW 100 →
Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.