B&C 12NDL88
Paramètres Thiele-Small
| Taille nominale | 12" |
|---|---|
| Impédance | 16 Ω |
| Fs | 50 Hz |
| Qts | 0.37 |
| Qes | 0.38 |
| Qms | 8.3 |
| Vas | 55 L |
| Sd | 522 cm² |
| Xmax | 8 mm |
| Re | 11.1 Ω |
| Bl | 25.3 T·m |
| Mms | 70 g |
| Pe | 700 W |
| Sensibilité | 97 dB |
Indication d'alignement
| EBP | 132 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 20.7 L |
EBP > 100 : favorise un alignement bass-reflex.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Candidats de substitution
| HP | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| B&C 12PLB100 | 50 = | 0.37 = | 47 -8 | 9 +1 | 97 = | close | 8 Ω vs 16 Ω: amp load changes | + |
| 18 Sound 12NLW9300 | 47 -3 | 0.42 +0.05 | 56 +1 | 8 = | 97 = | close | 8 Ω vs 16 Ω: amp load changes | + |
| Beyma 12MCS500 | 57 +7 | 0.36 -0.01 | 57 +2 | 8 = | 98 +1 | close | 8 Ω vs 16 Ω: amp load changes · 500 W vs 700 W: lower power handling | + |
| B&C 12 NDL 88 16 Ohms | 50 = | 0.363 -0.01 | 55 = | 7.1 -0.9 | 93.1 -3.9 | close | Xmax 7.1 mm < 8 mm: lower excursion-limited SPL | + |
| 18 Sound 12NLW9300 v2022 | 47 -3 | 0.416 +0.05 | 56 +1 | 8 = | 95.4 -1.6 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Faital PRO 12HP1010 | 45 -5 | 0.34 -0.03 | 56.5 +1.5 | 9.25 +1.25 | 96 -1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Beyma 12"MC500 | 57 +7 | 0.34 -0.03 | 57 +2 | 8 = | 98 +1 | close | 8 Ω vs 16 Ω: amp load changes · 500 W vs 700 W: lower power handling | + |
| Beyma 12"LX60V2 | 49 -1 | 0.38 +0.01 | 43 -12 | 9 +1 | 96 -1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Beyma 112Nd/W | 48 -2 | 0.415 +0.04 | 55 = | 7.4 -0.6 | 95 -2 | close | 8 Ω vs 16 Ω: amp load changes · Xmax 7.4 mm < 8 mm: lower excursion-limited SPL | + |
| Oberton 12NMB35 | 54.42 +4.42 | 0.36 -0.01 | 54.29 -0.71 | 6.75 -1.25 | 99 +2 | close | 8 Ω vs 16 Ω: amp load changes · Xmax 6.75 mm < 8 mm: lower excursion-limited SPL | + |
Comparer les 3 plus proches avec le 12NDL88 →
Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.