B&C 10 PS 26 (prodance)
Paramètres Thiele-Small
| Taille nominale | 10" |
|---|---|
| Impédance | 8 Ω |
| Fs | 53.4 Hz |
| Qts | 0.267 |
| Qes | 0.28 |
| Qms | 5.99 |
| Vas | 39.5 L |
| Sd | 330.1 cm² |
| Xmax | 5.4 mm |
| Re | 5.68 Ω |
| Bl | 15.3 T·m |
| Mms | 34.4 g |
| Pe | 350 W |
| Sensibilité | 96.8 dB |
Indication d'alignement
| EBP | 191 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 6.6 L |
EBP > 100 : favorise un alignement bass-reflex.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Candidats de substitution
| HP | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| Sica 10 K 3 PL | 50.6 -2.8 | 0.26 -0.01 | 40 +0.5 | 6.5 +1.1 | 96.7 -0.1 | close | + | |
| B&C 10PS26 | 54 +0.6 | 0.29 +0.02 | 38 -1.5 | 5.5 +0.1 | 96 -0.8 | close | + | |
| 18 Sound 10NTLS2000 | 50 -3.4 | 0.26 -0.01 | 38 -1.5 | 7.4 +2 | 97 +0.2 | close | + | |
| RCF MB 10N251 | 55 +1.6 | 0.271 = | 38.8 -0.7 | 4.6 -0.8 | 97.4 +0.6 | close | Xmax 4.6 mm < 5.4 mm: lower excursion-limited SPL | + |
| Sica 10 N 3 PL | 51 -2.4 | 0.29 +0.02 | 40.5 +1 | 5.5 +0.1 | 96.1 -0.7 | close | + | |
| B&C 10 PS 26 | 54 +0.6 | 0.296 +0.03 | 38 -1.5 | 5.5 +0.1 | 96 -0.8 | close | + | |
| Sica 10 PN 3 | 48.1 -5.3 | 0.26 -0.01 | 40.1 +0.6 | 7 +1.6 | 96.1 -0.7 | close | + | |
| 18 Sound 10W500 | 53 -0.4 | 0.29 +0.02 | 45.2 +5.7 | 5.5 +0.1 | 98 +1.2 | close | + | |
| Faital PRO 10PR310 | 55 +1.6 | 0.31 +0.04 | 40.3 +0.8 | 4.92 -0.48 | 97 +0.2 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 4.92 mm < 5.4 mm: lower excursion-limited SPL | + |
| B&C 10NDL64 | 56 +2.6 | 0.26 -0.01 | 31 -8.5 | 6 +0.6 | 97 +0.2 | close | 250 W vs 350 W: lower power handling | + |
Comparer les 3 plus proches avec le 10 PS 26 (prodance) →
Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.