Ardan PRO W-31
Paramètres Thiele-Small
| Taille nominale | 12" |
|---|---|
| Impédance | 8 Ω |
| Fs | 36.4 Hz |
| Qts | 0.382 |
| Qes | 0.439 |
| Qms | 2.922 |
| Vas | 170.6 L |
| Sd | 551 cm² |
| Xmax | 4 mm |
| Re | 7 Ω |
| Bl | 13.2 T·m |
| Mms | 47.7 g |
| Pe | 200 W |
| Sensibilité | 95.3 dB |
Indication d'alignement
| EBP | 83 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 70.3 L |
EBP 50-100 : fonctionne en clos ou en bass-reflex.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Candidats de substitution
| HP | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| Supravox 285 GMF vp5 | 35 -1.4 | 0.372 -0.01 | 150 -20.6 | 4 = | 95.4 +0.1 | close | 70 W vs 200 W: lower power handling | + |
| Supravox 285 GMF vp6 | 35 -1.4 | 0.372 -0.01 | 150 -20.6 | 4 = | 95.4 +0.1 | close | 70 W vs 200 W: lower power handling | + |
| Beyma HP12 | 36 -0.4 | 0.401 +0.02 | 200 +29.4 | 4 = | 95.6 +0.3 | close | 150 W vs 200 W: lower power handling | + |
| Eminence DELTALITE II 2512 v2 | 37 +0.6 | 0.386 = | 147 -23.6 | 4.9 +0.9 | 96.3 +1 | close | + | |
| Sonido SCW-300 | 35 -1.4 | 0.401 +0.02 | 210 +39.4 | 4.5 +0.5 | 95 -0.3 | close | 50 W vs 200 W: lower power handling | + |
| Ardan W PRO-31 | 36.8 +0.4 | 0.373 -0.01 | 133.9 -36.7 | 6 +2 | 94.6 -0.7 | close | + | |
| Klipsch K28E | 35.1 -1.3 | 0.441 +0.06 | 152.7 -17.9 | 4 = | 96.5 +1.2 | close | 4 Ω vs 8 Ω: amp load changes · 100 W vs 200 W: lower power handling | + |
| Davis KIT ALBEDO | 37.5 +1.1 | 0.459 +0.08 | 166 -4.6 | 5 +1 | 96.5 +1.2 | close | 150 W vs 200 W: lower power handling | + |
| Beyma 12BR70 | 35 -1.4 | 0.355 -0.03 | 135 -35.6 | 4.8 +0.8 | 94.7 -0.6 | close | 125 W vs 200 W: lower power handling | + |
| Tannoy DC 3134 CPA12 | 37.7 +1.3 | 0.369 -0.01 | 226.7 +56.1 | 5 +1 | 96.1 +0.8 | close | 16 Ω vs 8 Ω: amp load changes · 75 W vs 200 W: lower power handling | + |
Comparer les 3 plus proches avec le PRO W-31 →
Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.