Altec ER-10
Paramètres Thiele-Small
| Taille nominale | 10" |
|---|---|
| Impédance | 8 Ω |
| Fs | 75 Hz |
| Qts | 0.289 |
| Qes | 0.32 |
| Qms | 3 |
| Vas | 29.9 L |
| Sd | 348.4 cm² |
| Xmax | 2.5 mm |
| Re | 6.5 Ω |
| Bl | 15.7 T·m |
| Mms | 25.6 g |
| Pe | 200 W |
| Sensibilité | 98.8 dB |
Indication d'alignement
| EBP | 234 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 6 L |
EBP > 100 : favorise un alignement bass-reflex.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Candidats de substitution
| HP | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| B&C 250 AMX | 66 -9 | 0.284 -0.01 | 30 +0.1 | 2.4 -0.1 | 98.4 -0.4 | close | Xmax 2.4 mm < 2.5 mm: lower excursion-limited SPL | + |
| RCF CX 10g251 | 72 -3 | 0.283 -0.01 | 33 +3.1 | 3.8 +1.3 | 100 +1.2 | close | + | |
| Ciare PW256 | 69 -6 | 0.255 -0.03 | 30 +0.1 | 2.5 = | 99.5 +0.7 | close | + | |
| JBL 2123H | 75 = | 0.27 -0.02 | 25 -4.9 | 2.5 = | 97.4 -1.4 | close | 6 Ω vs 8 Ω: amp load changes · 125 W vs 200 W: lower power handling | + |
| P.Audio SN10-300MBF | 62 -13 | 0.283 -0.01 | 30 +0.1 | 2.5 = | 97.2 -1.6 | close | + | |
| B&C 10MBX64 | 65 -10 | 0.3 +0.01 | 30 +0.1 | 4 +1.5 | 100 +1.2 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 10HX240 | 65 -10 | 0.275 -0.01 | 31.8 +1.9 | 3.5 +1 | 98.4 -0.4 | close | + | |
| 18 Sound 10NMB420 vp | 67.3 -7.7 | 0.272 -0.02 | 33 +3.1 | 4 +1.5 | 99.2 +0.4 | close | + | |
| Oberton 10M250 | 76.65 +1.65 | 0.28 -0.01 | 23.05 -6.85 | 2.75 +0.25 | 97 -1.8 | close | + | |
| Fane STUDIO 10M | 73 -2 | 0.34 +0.05 | 27.2 -2.7 | 3.1 +0.6 | 97.9 -0.9 | close | + |
Comparer les 3 plus proches avec le ER-10 →
Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.