Alcone AC 10 HE
Paramètres Thiele-Small
| Taille nominale | 10" |
|---|---|
| Impédance | 8 Ω |
| Fs | 28 Hz |
| Qts | 0.322 |
| Qes | 0.35 |
| Qms | 4.1 |
| Vas | 100 L |
| Sd | 346 cm² |
| Xmax | 3.5 mm |
| Re | 6.4 Ω |
| Bl | 13.2 T·m |
| Mms | 54.2 g |
| Pe | 150 W |
| Sensibilité | 90.9 dB |
Indication d'alignement
| EBP | 80 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 26.2 L |
EBP 50-100 : fonctionne en clos ou en bass-reflex.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Candidats de substitution
| HP | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Adéquation | Notes | Comparer |
|---|---|---|---|---|---|---|---|---|
| Davis 25SCA10W | 28 = | 0.332 +0.01 | 109 +9 | 4 +0.5 | 91.1 +0.2 | close | 60 W vs 150 W: lower power handling | + |
| Davis 25SCA10WR-8 v2018 | 28 = | 0.332 +0.01 | 109 +9 | 5 +1.5 | 91.1 +0.2 | close | 100 W vs 150 W: lower power handling | + |
| Ciare HW251 | 29 +1 | 0.33 +0.01 | 111 +11 | 4 +0.5 | 90.6 -0.3 | close | + | |
| Davis 25GCA10W | 26 -2 | 0.332 +0.01 | 109 +9 | 4 +0.5 | 90.2 -0.7 | close | 80 W vs 150 W: lower power handling | + |
| SEAS 25F-EWX 4 vp | 27 -1 | 0.289 -0.03 | 100 = | 4 +0.5 | 93.2 +2.3 | close | 4 Ω vs 8 Ω: amp load changes · 60 W vs 150 W: lower power handling | + |
| Usher Audio 1001B | 29 +1 | 0.387 +0.07 | 100.2 +0.2 | 5 +1.5 | 91 +0.1 | close | 100 W vs 150 W: lower power handling | + |
| Alpine 6013 | 30 +2 | 0.313 -0.01 | 96 -4 | 3.8 +0.3 | 94.8 +3.9 | close | 4 Ω vs 8 Ω: amp load changes · 100 W vs 150 W: lower power handling | + |
| HiVi F10 v2009 | 28 = | 0.31 -0.01 | 78.6 -21.4 | 5.5 +2 | 90.1 -0.8 | close | 100 W vs 150 W: lower power handling | + |
| Beyma 10B-60 | 31 +3 | 0.35 +0.03 | 115 +15 | 4 +0.5 | 90.6 -0.3 | close | 40 W vs 150 W: lower power handling | + |
| SB Acoustics SW26SFC38-4 | 28 = | 0.31 -0.01 | 84 -16 | 5.5 +2 | 93 +2.1 | close | 4 Ω vs 8 Ω: amp load changes · 80 W vs 150 W: lower power handling | + |
Comparer les 3 plus proches avec le AC 10 HE →
Classé par similarité de paramètres uniquement (Qts, Fs, Vas, Xmax, sensibilité). Même taille nominale requise. Une indication, pas une simulation, modélisez l'échange avant de couper ou d'acheter.
Utilisé dans les caissons (0)
No enclosure in the catalog uses this driver yet.