kicksim
18" Kickbin Bandpass
Specifications
| Topology | bandpass |
|---|---|
| Net volume | 90 L |
| Dimensions (H×W×D) | 680 × 600 × 500 mm |
| Footprint | 3000 cm² |
| Weight | 38 kg |
| F3 | 58 Hz |
| F6 | 52 Hz |
| Fb (port/vent tuning) | 80 Hz |
| Max SPL | 135 dB |
| Impedance minimum | 6.2 Ω |
| Recommended crossover | 160 Hz |
| Recommended power | 1000 W |
| Power handling (AES) | 1000 W |
| Power handling (program) | 2000 W |
| Max port velocity | 18 m/s |
| Output density | 115.5 dB/size |
| Plywood sheets | 2× 2440×1220 mm |
| Connectors | speakON NL4 |
Drivers (1)
| Model | Format | Impedance | Fs | Detail | Pe | Sensitivity |
|---|---|---|---|---|---|---|
| B&C 18DS115 | 18" | 8 Ω | 30 Hz | Qts 0.2 · Vas 168 L · Xmax 16.5 mm | 1700 W | 98 dB |
Measurements / Simulations
Images
Sources
- design.txt · hornresp
Notes
Build notes
Sample data: values are illustrative, not measured.
Classic 18“ dual-chamber bandpass tuned for kick frequencies. The front chamber acts as a high-pass filter and the rear chamber as a low-pass filter, producing a natural bandpass response centred around 60-120 Hz with steep skirts outside that range.
Chamber tuning
- Rear chamber: ~60 L, tuned at 52 Hz
- Front chamber: ~30 L, tuned at 115 Hz
- Both chambers vented with slot ports
Usage
Typically crossed at 80-120 Hz to subs below and mids above. The steep bandpass roll-off means minimal low-frequency bleed and no high-mid content: all kick, nothing else.