← all drivers

Zeuz 10 400 HC

10" · 8 Ω · 200 W · 94.1 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance8 Ω
Fs43.1 Hz
Qts0.367
Qes0.392
Qms5.831
Vas66.1 L
Sd341 cm²
Xmax2.5 mm
Re6.6 Ω
Bl12.4 T·m
Mms33.7 g
Pe200 W
Sensitivity94.1 dB

Alignment hint

EBP110 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 24.4 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Beyma SM110/N43 -0.10.353 -0.0165 -1.14 +1.594.5 +0.4close+
Beyma SM11042 -1.10.345 -0.0265 -1.14 +1.593.6 -0.5close+
Eminence LEGEND B10248 +4.90.389 +0.0265 -1.13 +0.595 +0.9close+
Audax HT240Z040 -3.10.369 =70 +3.94 +1.596.2 +2.1close4 Ω vs 8 Ω: amp load changes · 90 W vs 200 W: lower power handling+
Ground Zero GZCK 250SPL45.4 +2.30.36 -0.0167.9 +1.812 +9.594.1 =close4 Ω vs 8 Ω: amp load changes+
Beyma 10CX300/FE48 +4.90.38 +0.0162.7 -3.46.75 +4.2594.1 =close+
Eminence BETA 10CX49 +5.90.38 +0.0161.1 -55 +2.594.3 +0.2close+
Dayton Audio MB1025-845 +1.90.35 -0.0250.7 -15.43 +0.594.7 +0.6close+
Eminence BETA 10CX-848 +4.90.397 +0.0364.2 -1.95 +2.595.8 +1.7close+
P.Audio HP-10W48.43 +5.330.4 +0.0355.35 -10.753 +0.593.4 -0.7usable+

Compare the closest 3 against the 10 400 HC →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.