Wavecor SW259WA01
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 29 Hz |
| Qts | 0.467 |
| Qes | 0.49 |
| Qms | 10 |
| Vas | 25 L |
| Sd | 312 cm² |
| Xmax | 6.3 mm |
| Re | 3.3 Ω |
| Bl | 14.2 T·m |
| Mms | 164.4 g |
| Pe | 200 W |
| Sensitivity | 86.8 dB |
Alignment hint
| EBP | 59 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 19.3 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Wavecor SW263TU01 | 29.5 +0.5 | 0.5 +0.03 | 24.5 -0.5 | 6.4 +0.1 | 86.8 = | close | + | |
| JBL S3 1024 | 30.2 +1.2 | 0.476 +0.01 | 25.3 +0.3 | 6 -0.3 | 85.5 -1.3 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 6 mm < 6.3 mm: lower excursion-limited SPL | + |
| JBL GTO 1014 | 28.7 -0.3 | 0.456 -0.01 | 29.2 +4.2 | 7.3 +1 | 87.8 +1 | close | + | |
| hertz Hertz Audio MPS 250 S4 | 29 = | 0.476 +0.01 | 21.2 -3.8 | 8.2 +1.9 | 85.8 -1 | close | + | |
| Focal P25F | 31 +2 | 0.458 -0.01 | 29 +4 | 6.9 +0.6 | 87.6 +0.8 | close | + | |
| Dayton Audio TIT280C-4 | 29.6 +0.6 | 0.442 -0.03 | 28.3 +3.3 | 8.6 +2.3 | 87.8 +1 | close | + | |
| JBL GTO 1014D | 29.7 +0.7 | 0.439 -0.03 | 30.2 +5.2 | 7.3 +1 | 87.6 +0.8 | close | + | |
| JBL GT5-10 | 30 +1 | 0.498 +0.03 | 31.5 +6.5 | 6.7 +0.4 | 87 +0.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Rockford Fosgate P3D2-10 | 26.6 -2.4 | 0.495 +0.03 | 27 +2 | 9.4 +3.1 | 85.7 -1.1 | close | + | |
| Dayton Audio UM10-22 v2021 | 26.9 -2.1 | 0.495 +0.03 | 23.5 -1.5 | 9 +2.7 | 84.9 -1.9 | close | + |
Compare the closest 3 against the SW259WA01 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.