Warehouse Sound WGS 12L
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 49.6 Hz |
| Qts | 0.242 |
| Qes | 0.25 |
| Qms | 7.41 |
| Vas | 50.5 L |
| Sd | 366.1 cm² |
| Xmax | 3.3 mm |
| Re | 5.84 Ω |
| Bl | 16.7 T·m |
| Mms | 38.3 g |
| Pe | 200 W |
| Sensitivity | 97.3 dB |
Alignment hint
| EBP | 198 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 6.7 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 10PR300 | 50 +0.4 | 0.24 = | 49.8 -0.7 | 4.92 +1.62 | 96 -1.3 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Volt BM2500.5 PA | 52 +2.4 | 0.25 +0.01 | 43 -7.5 | 4 +0.7 | 97.5 +0.2 | close | + | |
| Beyma 10MI100 v2017 | 50 +0.4 | 0.213 -0.03 | 54 +3.5 | 4.5 +1.2 | 97.9 +0.6 | close | + | |
| Celestion BN10-200X | 50.7 +1.1 | 0.274 +0.03 | 52.1 +1.6 | 3.8 +0.5 | 95.4 -1.9 | close | + | |
| Beyma 10"MI100 | 50 +0.4 | 0.21 -0.03 | 54 +3.5 | 4.5 +1.2 | 98 +0.7 | close | + | |
| Beyma 10MW/ND | 47 -2.6 | 0.26 +0.02 | 48 -2.5 | 5.9 +2.6 | 96.3 -1 | close | + | |
| STX W.25.400.8.MCX | 54 +4.4 | 0.282 +0.04 | 50 -0.5 | 3.5 +0.2 | 98 +0.7 | close | + | |
| Audax PR24ST150 | 49 -0.6 | 0.263 +0.02 | 43 -7.5 | 3.5 +0.2 | 95.8 -1.5 | close | 150 W vs 200 W: lower power handling | + |
| Beyma 10G200 | 45 -4.6 | 0.251 +0.01 | 56.1 +5.6 | 4.5 +1.2 | 96.2 -1.1 | close | + | |
| SICA 10 F 2.5 CP | 52.4 +2.8 | 0.259 +0.02 | 41.4 -9.1 | 3.4 +0.1 | 96.8 -0.5 | close | 150 W vs 200 W: lower power handling | + |
Compare the closest 3 against the WGS 12L →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.