Visaton W250S
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 31 Hz |
| Qts | 0.401 |
| Qes | 0.49 |
| Qms | 2.2 |
| Vas | 140 L |
| Sd | 346 cm² |
| Xmax | 7 mm |
| Re | 6.5 Ω |
| Bl | 9 T·m |
| Mms | 31.6 g |
| Pe | 100 W |
| Sensitivity | 92.2 dB |
Alignment hint
| EBP | 63 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 66.4 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 10"BR60 V2 | 29 -2 | 0.39 -0.01 | 142 +2 | 6.5 -0.5 | 92 -0.2 | close | Xmax 6.5 mm < 7 mm: lower excursion-limited SPL | + |
| Beyma 10BR60 V2 v2023 | 29 -2 | 0.388 -0.01 | 142 +2 | 6.5 -0.5 | 91.8 -0.4 | close | Xmax 6.5 mm < 7 mm: lower excursion-limited SPL | + |
| Focal 11C 726 | 30.9 -0.1 | 0.378 -0.02 | 120 -20 | 6.9 -0.1 | 92.4 +0.2 | close | Xmax 6.9 mm < 7 mm: lower excursion-limited SPL | + |
| AB Sound TW 1041 | 32 +1 | 0.433 +0.03 | 158 +18 | 8 +1 | 93.3 +1.1 | close | + | |
| Samy Speaker TW1041 | 32 +1 | 0.433 +0.03 | 158 +18 | 8 +1 | 93.3 +1.1 | close | + | |
| Focal 10V 6411 | 32.9 +1.9 | 0.378 -0.02 | 116.9 -23.1 | 7 = | 93.4 +1.2 | close | + | |
| Focal 10N511 | 29.6 -1.4 | 0.371 -0.03 | 121 -19 | 6 -1 | 92.2 = | close | 60 W vs 100 W: lower power handling · Xmax 6 mm < 7 mm: lower excursion-limited SPL | + |
| SEAS CA26RFX | 29 -2 | 0.337 -0.06 | 129 -11 | 7 = | 92 -0.2 | close | + | |
| Focal 10K 515 | 31.5 +0.5 | 0.353 -0.05 | 145.1 +5.1 | 5.3 -1.7 | 93 +0.8 | close | Xmax 5.3 mm < 7 mm: lower excursion-limited SPL | + |
| Dayton Audio RS270S-8 | 26.9 -4.1 | 0.41 +0.01 | 147.2 +7.2 | 6 -1 | 90 -2.2 | close | Xmax 6 mm < 7 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the W250S →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.