← all drivers

Vifa WCF265

10" · 8 Ω · 80 W · 91.5 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance8 Ω
Fs24 Hz
Qts0.305
Qes0.35
Qms2.39
Vas155.9 L
Sd337 cm²
Xmax5 mm
Re5.5 Ω
Bl10.3 T·m
Mms44.9 g
Pe80 W
Sensitivity91.5 dB

Alignment hint

EBP69 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 35.6 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Eton 11-581/50 HEX v201523 -10.299 -0.01151 -4.95 =91.6 +0.1close+
Eton 11-612C8/50RP23 -10.289 -0.02152 -3.95 =91.7 +0.2close+
Eton 11-581/C8/50 HEX SII24 =0.31 +0.01134 -21.95 =91.5 =close+
Monacor SPP-28025 +10.292 -0.01145 -10.94.6 -0.491.7 +0.2closeXmax 4.6 mm < 5 mm: lower excursion-limited SPL+
Eton 11-581/50 HEX21 -30.296 -0.01153 -2.95 =90.5 -1close+
Vifa 25WP25024 =0.298 -0.01178 +22.18 +392.6 +1.1close+
Volt B250.824 =0.298 -0.01126 -29.95.5 +0.590.3 -1.2close+
Monacor SPH-250TC24 =0.304 =130 -25.94.5 -0.590.2 -1.3closeXmax 4.5 mm < 5 mm: lower excursion-limited SPL+
SEAS CA26RE4X - H131625 +10.279 -0.03164 +8.17.3 +2.392.5 +1close+
Scan-Speak 26W/4534G0023 -10.356 +0.05156 +0.16 +192.3 +0.8close4 Ω vs 8 Ω: amp load changes+

Compare the closest 3 against the WCF265 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.