Turbosound TS-10W300/8A
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 53 Hz |
| Qts | 0.415 |
| Qes | 0.44 |
| Qms | 7.45 |
| Vas | 31.6 L |
| Sd | 346 cm² |
| Xmax | 3.4 mm |
| Re | 7.8 Ω |
| Bl | 16.8 T·m |
| Mms | 47.9 g |
| Pe | 300 W |
| Sensitivity | 92.4 dB |
Alignment hint
| EBP | 120 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 16.6 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Focal 10V 6412 | 50 -3 | 0.423 +0.01 | 32.8 +1.2 | 3.3 -0.1 | 93.4 +1 | close | 100 W vs 300 W: lower power handling · Xmax 3.3 mm < 3.4 mm: lower excursion-limited SPL | + |
| PHL Audio 3002 v2010 | 48.6 -4.4 | 0.436 +0.02 | 29 -2.6 | 4 +0.6 | 92.3 -0.1 | close | 200 W vs 300 W: lower power handling | + |
| Monacor SPA-10PA | 54 +1 | 0.445 +0.03 | 37 +5.4 | 4 +0.6 | 93.5 +1.1 | close | 150 W vs 300 W: lower power handling | + |
| Clarion SRM2591 | 43 -10 | 0.398 -0.02 | 31.1 -0.5 | 3.5 +0.1 | 93.1 +0.7 | close | 4 Ω vs 8 Ω: amp load changes · 150 W vs 300 W: lower power handling | + |
| Jensen SMOOTH BS 10N/250A | 58 +5 | 0.429 +0.01 | 30.9 -0.7 | 4.7 +1.3 | 95.1 +2.7 | close | + | |
| SICA PL10B25S | 57.6 +4.6 | 0.438 +0.02 | 30.9 -0.7 | 4.8 +1.4 | 94.9 +2.5 | close | + | |
| Goldwood GW-10PC/4 | 43.1 -9.9 | 0.404 -0.01 | 32.7 +1.1 | 4.8 +1.4 | 92.9 +0.5 | close | 4 Ω vs 8 Ω: amp load changes · 200 W vs 300 W: lower power handling | + |
| Jensen BS10N/250 | 58 +5 | 0.438 +0.02 | 30.9 -0.7 | 4.8 +1.4 | 95 +2.6 | close | + | |
| Jensen BS10N/250A | 58 +5 | 0.438 +0.02 | 30.9 -0.7 | 4.8 +1.4 | 95 +2.6 | close | + | |
| B&C 10 CL 51 | 60 +7 | 0.394 -0.02 | 31 -0.6 | 3.7 +0.3 | 95.7 +3.3 | close | 150 W vs 300 W: lower power handling | + |
Compare the closest 3 against the TS-10W300/8A →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.