TC Sounds OEM 10 DVC vp

10" · 4 Ω · 500 W · 87.2 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	4 Ω
Fs	30 Hz
Qts	0.357
Qes	0.4
Qms	3.35
Vas	19.3 L
Sd	339.8 cm²
Xmax	6.6 mm
Re	3.11 Ω
Bl	18.6 T·m
Mms	236 g
Pe	500 W
Sensitivity	87.2 dB

Alignment hint

EBP	75 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 6.6 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Dayton Audio RSS265HO-4	30.3 +0.3	0.367 +0.01	22.8 +3.5	7.9 +1.3	87.7 +0.5	close		+
Dayton Audio SS10-22	34 +4	0.402 +0.05	20.6 +1.3	8 +1.4	87.1 -0.1	close	8 Ω vs 4 Ω: amp load changes	+
Dayton Audio TS280D-4 TITANIC MK 4	29.6 -0.4	0.37 +0.01	27.8 +8.5	6.4 -0.2	88.4 +1.2	usable	300 W vs 500 W: lower power handling · Xmax 6.4 mm < 6.6 mm: lower excursion-limited SPL	+
Dayton Audio RSS265HO-4 v2015	26.9 -3.1	0.356 =	29.4 +10.1	9.3 +2.7	87.2 =	usable		+
Infinity KAPPA 1000W	30.5 +0.5	0.37 +0.01	27 +7.7	10.25 +3.65	84.6 -2.6	usable	2 Ω vs 4 Ω: amp load changes	+
hertz Hertz Audio MPS 250 S4	29 -1	0.476 +0.12	21.2 +1.9	8.2 +1.6	85.8 -1.4	usable		+
Pioneer TS-W255C	35 +5	0.351 -0.01	24.9 +5.6	6.6 =	91 +3.8	usable	350 W vs 500 W: lower power handling	+
hertz Hertz Audio ML2500	33 +3	0.497 +0.14	19 -0.3	8 +1.4	88 +0.8	usable		+
Wavecor SW259WA01	29 -1	0.467 +0.11	25 +5.7	6.3 -0.3	86.8 -0.4	usable	200 W vs 500 W: lower power handling · Xmax 6.3 mm < 6.6 mm: lower excursion-limited SPL	+
Gladen SQX 10	38.8 +8.8	0.39 +0.03	24.5 +5.2	10 +3.4	87.1 -0.1	usable	350 W vs 500 W: lower power handling	+

Compare the closest 3 against the OEM 10 DVC vp →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.