the box 18LB100-4N
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 4 Ω |
| Fs | 34 Hz |
| Qts | 0.227 |
| Qes | 0.256 |
| Qms | 1.99 |
| Vas | 175 L |
| Sd | 908 cm² |
| Xmax | 5.4 mm |
| Re | 5.8 Ω |
| Bl | 26.5 T·m |
| Mms | 144.7 g |
| Pe | 800 W |
| Sensitivity | 97.7 dB |
Alignment hint
| EBP | 133 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 20.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Fane COLOSSUS 18-1500 | 33.5 -0.5 | 0.25 +0.02 | 175 = | 8.1 +2.7 | 97.8 +0.1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Void Acoustic V18-1000 | 34.5 +0.5 | 0.216 -0.01 | 201.7 +26.7 | 5.3 -0.1 | 99.3 +1.6 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 5.3 mm < 5.4 mm: lower excursion-limited SPL | + |
| Precision Devices PD.185N02 | 35.2 +1.2 | 0.24 +0.01 | 178.28 +3.28 | 12 +6.6 | 96.8 -0.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma 18QLEX1600/Fe | 30 -4 | 0.231 = | 195 +20 | 8.3 +2.9 | 97.2 -0.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Precision Devices PD.1850/2 | 33.1 -0.9 | 0.24 +0.01 | 203.84 +28.84 | 11.1 +5.7 | 96.7 -1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 18DS100 | 32 -2 | 0.24 +0.01 | 157 -18 | 14 +8.6 | 98 +0.3 | close | + | |
| B&C 18 DS 115 | 30 -4 | 0.2 -0.03 | 168 -7 | 7.5 +2.1 | 97.4 -0.3 | close | 8 Ω vs 4 Ω: amp load changes | + |
| PD PD 185C003 | 33 -1 | 0.224 = | 224 +49 | 8.8 +3.4 | 99.1 +1.4 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Precision Devices PD 185C003 | 33 -1 | 0.224 = | 224 +49 | 8.8 +3.4 | 99.1 +1.4 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma 18QLEX1600Fe | 30 -4 | 0.23 = | 195 +20 | 13 +7.6 | 97 -0.7 | close | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the 18LB100-4N →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.