Tannoy MONITOR RED 15
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 16 Ω |
| Fs | 32 Hz |
| Qts | 0.257 |
| Qes | 0.32 |
| Qms | 1.3 |
| Vas | 266 L |
| Sd | 770 cm² |
| Xmax | 2.6 mm |
| Re | 9.5 Ω |
| Bl | 21.5 T·m |
| Mms | 77.3 g |
| Pe | 50 W |
| Sensitivity | 95.6 dB |
Alignment hint
| EBP | 100 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 40.5 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Fostex 15W-300 | 31 -1 | 0.26 = | 262 -4 | 4 +1.4 | 97.3 +1.7 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Tannoy MONITOR SILVER 15 | 32 = | 0.257 = | 266 = | 1.8 -0.8 | 95.6 = | close | 25 W vs 50 W: lower power handling · Xmax 1.8 mm < 2.6 mm: lower excursion-limited SPL | + |
| Coral 15L100 | 29 -3 | 0.256 = | 265.7 -0.3 | 3.6 +1 | 97.6 +2 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Fostex L 469 | 30 -2 | 0.271 +0.01 | 259 -7 | 4 +1.4 | 96.7 +1.1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Mercuriale PTR 385 M0 | 33 +1 | 0.264 +0.01 | 252 -14 | 3.5 +0.9 | 98.2 +2.6 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Eminence MAGNUM 15 HO | 33 +1 | 0.27 +0.01 | 241 -25 | 4.8 +2.2 | 97.9 +2.3 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Beyma 15 XT | 33 +1 | 0.289 +0.03 | 270 +4 | 5 +2.4 | 98 +2.4 | close | 8 Ω vs 16 Ω: amp load changes | + |
| JBL 1500 AL | 27.3 -4.7 | 0.274 +0.02 | 264.6 -1.4 | 5.5 +2.9 | 96.5 +0.9 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Tannoy 3808 | 32 = | 0.265 +0.01 | 200 -66 | 3.9 +1.3 | 97.1 +1.5 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Beyma 380 MSPA | 36 +4 | 0.246 -0.01 | 242.2 -23.8 | 3.6 +1 | 97.8 +2.2 | close | 8 Ω vs 16 Ω: amp load changes | + |
Compare the closest 3 against the MONITOR RED 15 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.