Tannoy MONITOR GOLD 10 III-LZ
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 26 Hz |
| Qts | 0.23 |
| Qes | 0.26 |
| Qms | 2 |
| Vas | 200 L |
| Sd | 360 cm² |
| Xmax | 2.9 mm |
| Re | 5.81 Ω |
| Bl | 11.1 T·m |
| Mms | 34 g |
| Pe | 15 W |
| Sensitivity | 94.7 dB |
Alignment hint
| EBP | 100 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 23.7 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Tannoy HPD 295 | 26 = | 0.233 = | 200 = | 3 +0.1 | 94.7 = | close | + | |
| Tannoy 250/HF/III-L-Z/8/U | 26 = | 0.233 = | 200 = | 4 +1.1 | 94.7 = | close | + | |
| SEAS 25F-EWX 8 | 26 = | 0.226 = | 175 -25 | 4 +1.1 | 94.5 -0.2 | close | + | |
| Audax PR240M6 v2014 | 25 -1 | 0.26 +0.03 | 207 +7 | 4 +1.1 | 94.1 -0.6 | close | + | |
| Audax MHD24P45TSM2CA14 | 27 +1 | 0.259 +0.03 | 209.6 +9.6 | 4 +1.1 | 94.1 -0.6 | close | + | |
| Audax HIF24HSMC-4CA12 v2 | 27 +1 | 0.243 +0.01 | 179.6 -20.4 | 5 +2.1 | 94 -0.7 | close | + | |
| Monacor SPH-255 | 23 -3 | 0.238 +0.01 | 205 +5 | 4.5 +1.6 | 93 -1.7 | close | + | |
| SEAS 25F-EWX | 26 = | 0.23 = | 175 -25 | 8 +5.1 | 92.9 -1.8 | close | + | |
| Audax HD24S45TSM-C-2CA14 | 27 +1 | 0.258 +0.03 | 178 -22 | 4 +1.1 | 94 -0.7 | close | + | |
| SEAS 25F-EWX 4 | 25 -1 | 0.217 -0.01 | 175 -25 | 4 +1.1 | 96.7 +2 | close | 4 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the MONITOR GOLD 10 III-LZ →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.