Tannoy DC200

10" · 8 Ω · 40 W · 92 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	66.5 Hz
Qts	0.607
Qes	0.91
Qms	1.82
Vas	25.8 L
Sd	330.1 cm²
Xmax	1.6 mm
Re	6.7 Ω
Bl	10.2 T·m
Mms	33.9 g
Pe	40 W
Sensitivity	92 dB

Alignment hint

EBP	73 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 72.3 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
B&C 10 CLX 64	70 +3.5	0.627 +0.02	21 -4.8	2.3 +0.7	93.8 +1.8	close		+
RCF L10CX1AK	67.9 +1.4	0.59 -0.02	33 +7.2	3 +1.4	93.6 +1.6	usable		+
Celestion BL10-100X	74.4 +7.9	0.532 -0.07	25.1 -0.7	3.5 +1.9	93.8 +1.8	usable		+
LaVoce FBASS10-18-16	70 +3.5	0.57 -0.04	28.39 +2.59	4.8 +3.2	95 +3	usable	16 Ω vs 8 Ω: amp load changes	+
Eminence GAMMA 10 B	64.3 -2.2	0.529 -0.08	37.6 +11.8	1.6 =	92.4 +0.4	usable	16 Ω vs 8 Ω: amp load changes	+
Faital PRO 10PR300-16	65 -1.5	0.477 -0.13	26.7 +0.9	4.9 +3.3	91.7 -0.3	usable	16 Ω vs 8 Ω: amp load changes	+
Celestion BL 10-100	70 +3.5	0.608 =	33 +7.2	3.3 +1.7	95.7 +3.7	usable		+
Selenium 10PW3	73 +6.5	0.654 +0.05	29 +3.2	1.3 -0.3	94.9 +2.9	usable	Xmax 1.3 mm < 1.6 mm: lower excursion-limited SPL	+
Peerless FSL-1015R02-08	68.4 +1.9	0.616 +0.01	37.7 +11.9	2.2 +0.6	95.9 +3.9	usable		+
Hartke 10XL16	69.3 +2.8	0.47 -0.14	27.3 +1.5	5 +3.4	92.5 +0.5	usable	16 Ω vs 8 Ω: amp load changes	+

Compare the closest 3 against the DC200 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.