Tannoy DC 2513
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 42.4 Hz |
| Qts | 0.544 |
| Qes | 0.604 |
| Qms | 5.514 |
| Vas | 58 L |
| Sd | 330.1 cm² |
| Xmax | 3 mm |
| Re | 7.89 Ω |
| Bl | 11.4 T·m |
| Mms | 37.1 g |
| Pe | 30 W |
| Sensitivity | 90.7 dB |
Alignment hint
| EBP | 70 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 84.1 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| MCM Electronics 55-2981 | 41.8 -0.6 | 0.54 = | 58.1 +0.1 | 3.9 +0.9 | 91.1 +0.4 | close | + | |
| Monacor SP-252E | 42 -0.4 | 0.503 -0.04 | 57 -1 | 4 +1 | 93.7 +3 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Focal 10P08 vp | 43.2 +0.8 | 0.56 +0.02 | 65 +7 | 5.5 +2.5 | 93.9 +3.2 | close | + | |
| Eminence EMINATOR 2010 | 41 -1.4 | 0.582 +0.04 | 61.4 +3.4 | 5 +2 | 93.9 +3.2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Beyma 10BR60 STUDIO | 42 -0.4 | 0.467 -0.08 | 47 -11 | 3.6 +0.6 | 90.4 -0.3 | close | + | |
| Cobalt CS 10 SCV | 34 -8.4 | 0.504 -0.04 | 56 -2 | 4.3 +1.3 | 91.7 +1 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Artech SPC-254 | 38.5 -3.9 | 0.536 -0.01 | 49 -9 | 5.3 +2.3 | 88.3 -2.4 | usable | + | |
| Beyma 10BR60 | 45 +2.6 | 0.467 -0.08 | 47 -11 | 3.5 +0.5 | 91.3 +0.6 | usable | + | |
| Mercuriale PTR 256 M0 | 50 +7.6 | 0.498 -0.05 | 56.9 -1.1 | 3.5 +0.5 | 94.2 +3.5 | usable | + | |
| Eminence BETA-10B 16-Ohm | 51.6 +9.2 | 0.51 -0.03 | 61.37 +3.37 | 3 = | 94.1 +3.4 | usable | 16 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the DC 2513 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.