Tang Band WT-644F
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 32 Hz |
| Qts | 0.357 |
| Qes | 0.37 |
| Qms | 10.14 |
| Vas | 77 L |
| Sd | 350 cm² |
| Xmax | 7.9 mm |
| Re | 6.4 Ω |
| Bl | 13.9 T·m |
| Mms | 55.2 g |
| Pe | 180 W |
| Sensitivity | 91.3 dB |
Alignment hint
| EBP | 86 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 26.3 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| STX W.27.400.8.MC | 31 -1 | 0.329 -0.03 | 79 +2 | 7.6 -0.3 | 91.6 +0.3 | close | Xmax 7.6 mm < 7.9 mm: lower excursion-limited SPL | + |
| Visaton TIW250 | 31 -1 | 0.324 -0.03 | 80 +3 | 8.8 +0.9 | 91.7 +0.4 | close | + | |
| JBL P1000 | 30 -2 | 0.382 +0.03 | 71 -6 | 7.8 -0.1 | 91.2 -0.1 | close | Xmax 7.8 mm < 7.9 mm: lower excursion-limited SPL | + |
| Focal 11V 7511 v2008 | 30.8 -1.2 | 0.362 +0.01 | 94.3 +17.3 | 8 +0.1 | 91.5 +0.2 | close | + | |
| AE Speakers TD10S | 32.7 +0.7 | 0.347 -0.01 | 67.5 -9.5 | 7 -0.9 | 91.4 +0.1 | close | Xmax 7 mm < 7.9 mm: lower excursion-limited SPL | + |
| Visaton TIW250XS 8 Ohms v2 | 33 +1 | 0.328 -0.03 | 66 -11 | 7.9 = | 91.8 +0.5 | close | + | |
| Boston Acoustics PRO 10.4 LF | 33 +1 | 0.36 = | 66.26 -10.74 | 7.5 -0.4 | 89.4 -1.9 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 7.5 mm < 7.9 mm: lower excursion-limited SPL | + |
| Alpine SWG-1044 | 33 +1 | 0.34 -0.02 | 65 -12 | 8 +0.1 | 89.8 -1.5 | close | 4 Ω vs 8 Ω: amp load changes | + |
| MTX Audio BG104A | 26 -6 | 0.359 = | 72.8 -4.2 | 9.7 +1.8 | 91.1 -0.2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 10FE330 | 35 +3 | 0.4 +0.04 | 72.4 -4.6 | 8.32 +0.42 | 92 +0.7 | close | + |
Compare the closest 3 against the WT-644F →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.