TAD TL-1101 H
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 16 Ω |
| Fs | 38 Hz |
| Qts | 0.252 |
| Qes | 0.27 |
| Qms | 3.86 |
| Vas | 62 L |
| Sd | 366 cm² |
| Xmax | 1.3 mm |
| Re | 13 Ω |
| Bl | 24.7 T·m |
| Mms | 53.1 g |
| Pe | 100 W |
| Sensitivity | 90.9 dB |
Alignment hint
| EBP | 141 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| TAD AL-1103 | 34 -4 | 0.27 +0.02 | 53 -9 | 4.5 +3.2 | 91 +0.1 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Eminence KAPPALITE 3010 LF | 38.7 +0.7 | 0.273 +0.02 | 62.4 +0.4 | 8.5 +7.2 | 93.5 +2.6 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| JBL 2122H | 40 +2 | 0.229 -0.02 | 65.1 +3.1 | 3.1 +1.8 | 95.4 +4.5 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| AE Speakers TD10X | 35 -3 | 0.27 +0.02 | 67.5 +5.5 | 7 +5.7 | 92.4 +1.5 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| AE Speakers TD10M-8 | 40.1 +2.1 | 0.238 -0.01 | 59.2 -2.8 | 6 +4.7 | 94.5 +3.6 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Eminence Kappa Pro-10LF | 39 +1 | 0.28 +0.03 | 72.97 +10.97 | 7.2 +5.9 | 91.6 +0.7 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Beyma 10LW30/N | 38 = | 0.234 -0.02 | 56 -6 | 7 +5.7 | 94.2 +3.3 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| AE Speakers TD10M | 40.6 +2.6 | 0.235 -0.02 | 59.1 -2.9 | 6 +4.7 | 94.7 +3.8 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Ciare CW250C | 39 +1 | 0.27 +0.02 | 77 +15 | 5 +3.7 | 93.3 +2.4 | usable | 4 Ω vs 16 Ω: amp load changes | + |
| Faital PRO 10RS430 v2025 | 32 -6 | 0.282 +0.03 | 59.2 -2.8 | 9.2 +7.9 | 90.9 = | usable | 8 Ω vs 16 Ω: amp load changes | + |
Compare the closest 3 against the TL-1101 H →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.