Supravox 380-2000 LC
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 38.7 Hz |
| Qts | 0.568 |
| Qes | 0.631 |
| Qms | 5.73 |
| Vas | 272.2 L |
| Sd | 907.9 cm² |
| Xmax | 5 mm |
| Re | 5.8 Ω |
| Bl | 12.7 T·m |
| Mms | 71.9 g |
| Pe | 120 W |
| Sensitivity | 97.3 dB |
Alignment hint
| EBP | 61 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 495.1 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Ardan PRO W-38 vp2 | 39.5 +0.8 | 0.51 -0.06 | 254.7 -17.5 | 4.5 -0.5 | 97 -0.3 | close | Xmax 4.5 mm < 5 mm: lower excursion-limited SPL | + |
| Fane 15-400LF v2016 | 41 +2.3 | 0.573 +0.01 | 210 -62.2 | 5 = | 97.1 -0.2 | close | + | |
| Fane SOVEREIGN 15-400 LF | 41 +2.3 | 0.573 +0.01 | 210 -62.2 | 5 = | 97.1 -0.2 | close | + | |
| Fane 15-400LF | 39 +0.3 | 0.577 +0.01 | 210 -62.2 | 5 = | 96.1 -1.2 | close | + | |
| Eminence DELTALITE 2515 | 41 +2.3 | 0.517 -0.05 | 284.1 +11.9 | 4.8 -0.2 | 99 +1.7 | close | Xmax 4.8 mm < 5 mm: lower excursion-limited SPL | + |
| Eminence DELTA 15 LFA | 39 +0.3 | 0.48 -0.09 | 241 -31.2 | 4.8 -0.2 | 97.5 +0.2 | close | Xmax 4.8 mm < 5 mm: lower excursion-limited SPL | + |
| LaVoce FBASS15-20 | 40 +1.3 | 0.53 -0.04 | 234.41 -37.79 | 4.3 -0.7 | 98 +0.7 | close | Xmax 4.3 mm < 5 mm: lower excursion-limited SPL | + |
| Selenium 38GPT12 vp2 | 39.9 +1.2 | 0.469 -0.1 | 242.8 -29.4 | 5 = | 97.8 +0.5 | close | + | |
| Celestion K15-100 | 35 -3.7 | 0.594 +0.03 | 342 +69.8 | 5 = | 96.2 -1.1 | close | + | |
| Eminence DELTA 15LFA | 39 +0.3 | 0.48 -0.09 | 241 -31.2 | 4.8 -0.2 | 96 -1.3 | close | Xmax 4.8 mm < 5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 380-2000 LC →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.