Supravox 285-2000EXC_08V
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 53 Hz |
| Qts | 0.393 |
| Qes | 0.41 |
| Qms | 9.31 |
| Vas | 154 L |
| Sd | 458.9 cm² |
| Xmax | 4 mm |
| Re | 6.5 Ω |
| Bl | 9.6 T·m |
| Mms | 17.3 g |
| Pe | 70 W |
| Sensitivity | 100.4 dB |
Alignment hint
| EBP | 129 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 68.8 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Supravox 285 GMF vp8 | 52.2 -0.8 | 0.349 -0.04 | 152.5 -1.5 | 4 = | 100.7 +0.3 | close | + | |
| Supravox 285 GMF v2008 | 47 -6 | 0.372 -0.02 | 150 -4 | 4 = | 98.9 -1.5 | close | + | |
| Supravox 285 GMF v2012 | 47 -6 | 0.372 -0.02 | 150 -4 | 4 = | 98.9 -1.5 | close | + | |
| Supravox 285 GMF vp7 | 56.3 +3.3 | 0.369 -0.02 | 137.5 -16.5 | 3.8 -0.2 | 100.9 +0.5 | close | Xmax 3.8 mm < 4 mm: lower excursion-limited SPL | + |
| Supravox 285 GMF vp4 | 50.1 -2.9 | 0.335 -0.06 | 151 -3 | 3.9 -0.1 | 100.2 -0.2 | close | Xmax 3.9 mm < 4 mm: lower excursion-limited SPL | + |
| Supravox 285 GMF vp3 | 50.4 -2.6 | 0.325 -0.07 | 154 = | 3.9 -0.1 | 100.5 +0.1 | close | Xmax 3.9 mm < 4 mm: lower excursion-limited SPL | + |
| Supravox 285-2000EXC_07V | 53 = | 0.485 +0.09 | 158 +4 | 4 = | 99.5 -0.9 | close | + | |
| Supravox 285 GMF v2019 | 47.8 -5.2 | 0.327 -0.07 | 157 +3 | 4 = | 99.9 -0.5 | close | + | |
| Supravox 285-2000EXC_09V | 53 = | 0.309 -0.08 | 156 +2 | 3.8 -0.2 | 101.5 +1.1 | close | Xmax 3.8 mm < 4 mm: lower excursion-limited SPL | + |
| Supravox 285 GMF vp wowo | 50.2 -2.8 | 0.323 -0.07 | 143 -11 | 3.7 -0.3 | 100.2 -0.2 | close | Xmax 3.7 mm < 4 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 285-2000EXC_08V →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.