STX W.25.300.8.MC
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 51 Hz |
| Qts | 0.483 |
| Qes | 0.58 |
| Qms | 2.9 |
| Vas | 59 L |
| Sd | 346 cm² |
| Xmax | 4 mm |
| Re | 5.2 Ω |
| Bl | 8.9 T·m |
| Mms | 27.7 g |
| Pe | 150 W |
| Sensitivity | 95.2 dB |
Alignment hint
| EBP | 88 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 51.6 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence BETA10 | 53 +2 | 0.489 +0.01 | 60.1 +1.1 | 5 +1 | 95.8 +0.6 | close | + | |
| Dayton Audio PA255-8 | 46.4 -4.6 | 0.484 = | 59 = | 5 +1 | 94.6 -0.6 | close | + | |
| Faital PRO 10FE200 | 55 +4 | 0.49 +0.01 | 61 +2 | 4.62 +0.62 | 96 +0.8 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Mercuriale PTR 256 M0 | 50 -1 | 0.498 +0.02 | 56.9 -2.1 | 3.5 -0.5 | 94.2 -1 | close | 100 W vs 150 W: lower power handling · Xmax 3.5 mm < 4 mm: lower excursion-limited SPL | + |
| Eminence BETA 10 A | 53 +2 | 0.489 +0.01 | 60.1 +1.1 | 3 -1 | 95.8 +0.6 | close | Xmax 3 mm < 4 mm: lower excursion-limited SPL | + |
| Ciare HX255 GR vp | 55.3 +4.3 | 0.569 +0.09 | 57.4 -1.6 | 4 = | 95.4 +0.2 | close | 100 W vs 150 W: lower power handling | + |
| Eminence BASSLITE CA2010 | 51 = | 0.505 +0.02 | 49 -10 | 3.5 -0.5 | 94.6 -0.6 | close | Xmax 3.5 mm < 4 mm: lower excursion-limited SPL | + |
| Fane SOVEREIGN 10-125 | 50 -1 | 0.488 +0.01 | 80.2 +21.2 | 5 +1 | 95.3 +0.1 | close | + | |
| Faital PRO 10FE300 | 50 -1 | 0.52 +0.04 | 50.5 -8.5 | 5.52 +1.52 | 96 +0.8 | close | + | |
| Eminence BETA-10A | 53 +2 | 0.49 +0.01 | 60.1 +1.1 | 3 -1 | 97 +1.8 | close | Xmax 3 mm < 4 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the W.25.300.8.MC →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.