Sphynx SP-W12-BP ferrite
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 34.3 Hz |
| Qts | 1.063 |
| Qes | 1.48 |
| Qms | 3.77 |
| Vas | 337 L |
| Sd | 572.6 cm² |
| Xmax | 6 mm |
| Re | 7.9 Ω |
| Bl | 5.8 T·m |
| Mms | 29.4 g |
| Pe | 100 W |
| Sensitivity | 91.7 dB |
Alignment hint
| EBP | 23 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | Qts too high |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Sphynx SP-W12-BP v2015 | 34.3 = | 1.063 = | 337 = | 6 = | 91.7 = | close | + | |
| Sphynx SP-W12 IND | 30.4 -3.9 | 0.868 -0.19 | 336.9 -0.1 | 4 -2 | 91.3 -0.4 | usable | Xmax 4 mm < 6 mm: lower excursion-limited SPL | + |
| Sphynx SP-W12-BP | 30.4 -3.9 | 0.864 -0.2 | 336.9 -0.1 | 4 -2 | 91.3 -0.4 | usable | Xmax 4 mm < 6 mm: lower excursion-limited SPL | + |
| Kenwood RD 30 FU 120-F | 31.6 -2.7 | 0.879 -0.18 | 206.3 -130.7 | 8 +2 | 89.8 -1.9 | usable | + | |
| Philips AD12672/W8 | 29 -5.3 | 0.662 -0.4 | 245 -92 | 6 = | 92.3 +0.6 | usable | + | |
| Jamo 20325 | 32 -2.3 | 0.849 -0.21 | 163.4 -173.6 | 5 -1 | 93 +1.3 | usable | 4 Ω vs 8 Ω: amp load changes · Xmax 5 mm < 6 mm: lower excursion-limited SPL | + |
| Lautsprecher Technik MHB-12 | 38.2 +3.9 | 1.107 +0.04 | 132.7 -204.3 | 5 -1 | 88.9 -2.8 | risky | Xmax 5 mm < 6 mm: lower excursion-limited SPL | + |
| AE Speakers DIPOLE 12-D4 | 25.9 -8.4 | 0.685 -0.38 | 273 -64 | 10 +4 | 94.2 +2.5 | risky | 4 Ω vs 8 Ω: amp load changes | + |
| Goldwood GW‐212/4 | 35.8 +1.5 | 1.204 +0.14 | 166.6 -170.4 | 3.5 -2.5 | 88.9 -2.8 | risky | 4 Ω vs 8 Ω: amp load changes · Xmax 3.5 mm < 6 mm: lower excursion-limited SPL | + |
| Sphynx SP-W12-PRO-2 | 33 -1.3 | 0.574 -0.49 | 284 -53 | 4.3 -1.7 | 94.5 +2.8 | risky | Xmax 4.3 mm < 6 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the SP-W12-BP ferrite →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.