SpeaKa 150/180
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 32 Hz |
| Qts | 0.679 |
| Qes | 0.81 |
| Qms | 4.2 |
| Vas | 80.2 L |
| Sd | 415.5 cm² |
| Xmax | 4 mm |
| Re | 7.16 Ω |
| Bl | 11.5 T·m |
| Mms | 74.7 g |
| Pe | 150 W |
| Sensitivity | 87.6 dB |
Alignment hint
| EBP | 40 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 949.1 L |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Europsonic TS25-180D | 34 +2 | 0.767 +0.09 | 73.5 -6.7 | 4 = | 87 -0.6 | close | 90 W vs 150 W: lower power handling | + |
| Peerless SLS10 P830668 v2009 | 33 +1 | 0.591 -0.09 | 75.7 -4.5 | 5.8 +1.8 | 89.7 +2.1 | close | 70 W vs 150 W: lower power handling | + |
| Skytronic 902.214 | 34.3 +2.3 | 0.595 -0.08 | 70.2 -10 | 6.1 +2.1 | 87.7 +0.1 | close | + | |
| Kenford HW-1006 | 37 +5 | 0.787 +0.11 | 75 -5.2 | 4.7 +0.7 | 88.3 +0.7 | usable | + | |
| Oxygen ALIUM 253 | 34 +2 | 0.64 -0.04 | 73.4 -6.8 | 5.7 +1.7 | 91.6 +4 | usable | 4 Ω vs 8 Ω: amp load changes · 85 W vs 150 W: lower power handling | + |
| Sphynx SP-W10-SQP | 35 +3 | 0.675 = | 63 -17.2 | 3 -1 | 87.1 -0.5 | usable | 100 W vs 150 W: lower power handling · Xmax 3 mm < 4 mm: lower excursion-limited SPL | + |
| Peerless SLS10 P830668 v2012 | 32 = | 0.545 -0.13 | 72.9 -7.3 | 5.7 +1.7 | 89.6 +2 | usable | 70 W vs 150 W: lower power handling | + |
| JL Audio 10IB4 | 37.5 +5.5 | 0.771 +0.09 | 82.9 +2.7 | 7 +3 | 89.6 +2 | usable | 100 W vs 150 W: lower power handling | + |
| Europsonic HP25-180 | 34 +2 | 0.777 +0.1 | 86.3 +6.1 | 3 -1 | 89.3 +1.7 | usable | 90 W vs 150 W: lower power handling · Xmax 3 mm < 4 mm: lower excursion-limited SPL | + |
| GRS 10SW-4 | 34 +2 | 0.634 -0.05 | 57.5 -22.7 | 6.3 +2.3 | 89.5 +1.9 | usable | + |
Compare the closest 3 against the 150/180 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.