Sony XS-L151P5
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 4 Ω |
| Fs | 22.2 Hz |
| Qts | 0.46 |
| Qes | 0.5 |
| Qms | 5.65 |
| Vas | 195.9 L |
| Sd | 796 cm² |
| Xmax | 7 mm |
| Re | 3.15 Ω |
| Bl | 14.4 T·m |
| Mms | 235.8 g |
| Pe | 400 W |
| Sensitivity | 88.2 dB |
Alignment hint
| EBP | 44 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 143.7 L |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Powerbass M-1504 | 22 -0.2 | 0.442 -0.02 | 181.7 -14.2 | 11 +4 | 87.7 -0.5 | close | + | |
| GRS 15SSW-4HE | 20.7 -1.5 | 0.487 +0.03 | 196.6 +0.7 | 9.5 +2.5 | 89.8 +1.6 | close | 8 Ω vs 4 Ω: amp load changes · 300 W vs 400 W: lower power handling | + |
| Hertz Audio ES380.1 | 24.2 +2 | 0.52 +0.06 | 183 -12.9 | 9 +2 | 88.2 = | close | + | |
| Rockford Fosgate P1S2-15 | 23 +0.8 | 0.55 +0.09 | 191.5 -4.4 | 9 +2 | 87.4 -0.8 | close | 2 Ω vs 4 Ω: amp load changes · 250 W vs 400 W: lower power handling | + |
| Rockford Fosgate P1S4-15 | 23 +0.8 | 0.55 +0.09 | 191.5 -4.4 | 9 +2 | 87.3 -0.9 | close | 250 W vs 400 W: lower power handling | + |
| Dayton Audio UM15-22 ULTIMAX DVC | 19.5 -2.7 | 0.474 +0.01 | 224.3 +28.4 | 9.5 +2.5 | 90.2 +2 | close | + | |
| MTX Audio RT15-04 | 20 -2.2 | 0.479 +0.02 | 223 +27.1 | 10.3 +3.3 | 90.8 +2.6 | usable | 300 W vs 400 W: lower power handling | + |
| Oxygen AIR2 380 | 22.7 +0.5 | 0.543 +0.08 | 202.2 +6.3 | 11.5 +4.5 | 91.6 +3.4 | usable | + | |
| Pyle Audio PLPW15D | 29 +6.8 | 0.459 = | 195.7 -0.2 | 8 +1 | 92.3 +4.1 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Dayton Audio RSS390HF-4 v2015 | 19.5 -2.7 | 0.429 -0.03 | 212 +16.1 | 12 +5 | 91.2 +3 | usable | + |
Compare the closest 3 against the XS-L151P5 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.