SICA SL10B25P
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 57 Hz |
| Qts | 0.348 |
| Qes | 0.42 |
| Qms | 2.04 |
| Vas | 41.9 L |
| Sd | 330 cm² |
| Xmax | 4 mm |
| Re | 6.3 Ω |
| Bl | 12.4 T·m |
| Mms | 28.4 g |
| Pe | 250 W |
| Sensitivity | 95.7 dB |
Alignment hint
| EBP | 136 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 13.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| SICA 10 E 2 CS | 56 -1 | 0.347 = | 39.8 -2.1 | 4.1 +0.1 | 96 +0.3 | close | 150 W vs 250 W: lower power handling | + |
| SICA 10 N 2.5 PL v2017 | 57 = | 0.357 +0.01 | 40.9 -1 | 4.5 +0.5 | 96.5 +0.8 | close | + | |
| Sica 10 N 2.5 PL | 57 = | 0.36 +0.01 | 40.9 -1 | 4.5 +0.5 | 96.6 +0.9 | close | + | |
| SICA 10 FE 2.5 CP v2017 | 57 = | 0.365 +0.02 | 39.7 -2.2 | 4 = | 96.3 +0.6 | close | + | |
| Sica 10 Fe 2.5 CP | 57 = | 0.37 +0.02 | 39.7 -2.2 | 4 = | 96.3 +0.6 | close | + | |
| Volt BM251.3 PA | 55 -2 | 0.346 = | 44 +2.1 | 4.8 +0.8 | 96.8 +1.1 | close | + | |
| SB Audience BIANCO-10MW200 | 58 +1 | 0.336 -0.01 | 39.3 -2.6 | 5.2 +1.2 | 96.2 +0.5 | close | + | |
| SICA 10 L 2.5 SL 8 Ohms | 54.4 -2.6 | 0.326 -0.02 | 43.8 +1.9 | 4 = | 96.2 +0.5 | close | + | |
| SICA 10 L 2.5 SL Z006900 | 54.4 -2.6 | 0.326 -0.02 | 43.8 +1.9 | 4 = | 96.2 +0.5 | close | + | |
| SICA 10 L 2.5 SL | 54 -3 | 0.326 -0.02 | 43.8 +1.9 | 4 = | 96.2 +0.5 | close | + |
Compare the closest 3 against the SL10B25P →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.