SICA PL10B25S
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 57.6 Hz |
| Qts | 0.438 |
| Qes | 0.47 |
| Qms | 6.45 |
| Vas | 30.9 L |
| Sd | 346.3 cm² |
| Xmax | 4.8 mm |
| Re | 5.14 Ω |
| Bl | 12.8 T·m |
| Mms | 41.5 g |
| Pe | 250 W |
| Sensitivity | 94.9 dB |
Alignment hint
| EBP | 123 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 19.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Jensen BS10N/250 | 58 +0.4 | 0.438 = | 30.9 = | 4.8 = | 95 +0.1 | close | + | |
| Jensen BS10N/250A | 58 +0.4 | 0.438 = | 30.9 = | 4.8 = | 95 +0.1 | close | + | |
| Jensen SMOOTH BS 10N/250A | 58 +0.4 | 0.429 -0.01 | 30.9 = | 4.7 -0.1 | 95.1 +0.2 | close | Xmax 4.7 mm < 4.8 mm: lower excursion-limited SPL | + |
| Faital PRO 10FE400 | 60 +2.4 | 0.41 -0.03 | 33.6 +2.7 | 5.62 +0.82 | 95 +0.1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| LaVoce FBASS10-18 | 65 +7.4 | 0.43 -0.01 | 32.4 +1.5 | 4.5 -0.3 | 96 +1.1 | close | 150 W vs 250 W: lower power handling · Xmax 4.5 mm < 4.8 mm: lower excursion-limited SPL | + |
| Faital PRO 10FE400 | 60 +2.4 | 0.47 +0.03 | 35.3 +4.4 | 5.42 +0.62 | 96 +1.1 | close | + | |
| Celestion BN10-300X(4) | 64.2 +6.6 | 0.43 -0.01 | 29.2 -1.7 | 4 -0.8 | 93.8 -1.1 | close | 4 Ω vs 8 Ω: amp load changes · 150 W vs 250 W: lower power handling · Xmax 4 mm < 4.8 mm: lower excursion-limited SPL | + |
| Faital PRO 10PR300 | 65 +7.4 | 0.48 +0.04 | 30.6 -0.3 | 4.92 +0.12 | 97 +2.1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| LaVoce WSF102.00 | 65 +7.4 | 0.45 +0.01 | 34.03 +3.13 | 5.2 +0.4 | 97 +2.1 | close | 175 W vs 250 W: lower power handling | + |
| Eminence DELTA-10A-2 | 69.7 +12.1 | 0.44 = | 29.73 -1.17 | 6.39 +1.59 | 96.7 +1.8 | close | + |
Compare the closest 3 against the PL10B25S →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.