Sica 6 D 1.5 SL
Thiele-Small parameters
| Nominal size | 6" |
|---|---|
| Impedance | 8 Ω |
| Fs | 110 Hz |
| Qts | 0.46 |
| Qes | 0.55 |
| Qms | 2.65 |
| Vas | 4 L |
| Sd | 122.7 cm² |
| Xmax | 1.5 mm |
| Re | 5 Ω |
| Bl | 8.35 T·m |
| Mms | 11.2 g |
| Pe | 130 W |
| Sensitivity | 93.9 dB |
Alignment hint
| EBP | 200 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 2.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 6FE300 | 100 -10 | 0.46 = | 4.7 +0.7 | 3.9 +2.4 | 94 +0.1 | close | + | |
| LaVoce WSN061.52-16 | 108 -2 | 0.53 +0.07 | 4.46 +0.46 | 3.7 +2.2 | 93 -0.9 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 6FE200 | 120 +10 | 0.42 -0.04 | 4.3 +0.3 | 4.62 +3.12 | 95 +1.1 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Eminence ALPHA 6C | 107 -3 | 0.45 -0.01 | 5.7 +1.7 | 3.5 +2 | 93.3 -0.6 | usable | 4 Ω vs 8 Ω: amp load changes · 100 W vs 130 W: lower power handling | + |
| Faital PRO 6FE300 | 98 -12 | 0.41 -0.05 | 4.4 +0.4 | 3.9 +2.4 | 92 -1.9 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 6PR122 | 110 = | 0.39 -0.07 | 4.7 +0.7 | 2.75 +1.25 | 97 +3.1 | usable | + | |
| Sica 6 D 1.5 CS | 108.5 -1.5 | 0.63 +0.17 | 4.4 +0.4 | 1.5 = | 91.7 -2.2 | usable | 100 W vs 130 W: lower power handling | + |
| Eminence BETA-6A | 123 +13 | 0.56 +0.1 | 3.51 -0.49 | 4.5 +3 | 94 +0.1 | usable | + | |
| Faital PRO 6FE400 | 100 -10 | 0.5 +0.04 | 5.5 +1.5 | 4.77 +3.27 | 94 +0.1 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| LaVoce MAN062.00-16 | 103 -7 | 0.34 -0.12 | 3.77 -0.23 | 3.9 +2.4 | 94.5 +0.6 | usable | 16 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the 6 D 1.5 SL →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.