Sica 5 N 1.5 PL
Thiele-Small parameters
| Nominal size | 5" |
|---|---|
| Impedance | 8 Ω |
| Fs | 110.6 Hz |
| Qts | 0.56 |
| Qes | 0.72 |
| Qms | 2.55 |
| Vas | 3 L |
| Sd | 84.9 cm² |
| Xmax | 3 mm |
| Re | 5.7 Ω |
| Bl | 6.21 T·m |
| Mms | 7.1 g |
| Pe | 130 W |
| Sensitivity | 91 dB |
Alignment hint
| EBP | 154 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 5 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| LaVoce WSF051.02 | 106 -4.6 | 0.6 +0.04 | 3.26 +0.26 | 3.1 +0.1 | 91.5 +0.5 | close | 60 W vs 130 W: lower power handling | + |
| BMS 5N160 | 113 +2.4 | 0.43 -0.13 | 2.57 -0.43 | 5 +2 | 91 = | usable | 16 Ω vs 8 Ω: amp load changes | + |
| LaVoce WSF051.02-16 | 98 -12.6 | 0.66 +0.1 | 4.02 +1.02 | 3.2 +0.2 | 90.5 -0.5 | usable | 16 Ω vs 8 Ω: amp load changes · 60 W vs 130 W: lower power handling | + |
| BMS 5S117 | 95 -15.6 | 0.42 -0.14 | 3.25 +0.25 | 5 +2 | 91 = | usable | 16 Ω vs 8 Ω: amp load changes | + |
| Sica 5 D 1 CS | 79 -31.6 | 0.52 -0.04 | 5.5 +2.5 | 3 = | 90 -1 | usable | 60 W vs 130 W: lower power handling | + |
| Eminence ALPHA 5-8 | 87 -23.6 | 0.54 -0.02 | 6.14 +3.14 | 5.92 +2.92 | 89.4 -1.6 | usable | + | |
| Beyma 5G40Nd/N | 140 +29.4 | 0.45 -0.11 | 1.4 -1.6 | 3 = | 92 +1 | risky | 100 W vs 130 W: lower power handling | + |
| B&C 5NDL38 | 80 -30.6 | 0.36 -0.2 | 4.3 +1.3 | 3.5 +0.5 | 91 = | risky | 90 W vs 130 W: lower power handling | + |
| Faital PRO 5PR160 | 90 -20.6 | 0.31 -0.25 | 3.7 +0.7 | 5.1 +2.1 | 92 +1 | risky | + | |
| Sica 5 M 1.5 PL | 145 +34.4 | 0.51 -0.05 | 2 -1 | 1.5 -1.5 | 93.7 +2.7 | risky | Xmax 1.5 mm < 3 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 5 N 1.5 PL →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.