Sica 18 K 4 PL
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 36.8 Hz |
| Qts | 0.32 |
| Qes | 0.35 |
| Qms | 4.62 |
| Vas | 201 L |
| Sd | 1164.2 cm² |
| Xmax | 6.5 mm |
| Re | 6 Ω |
| Bl | 26.8 T·m |
| Mms | 178.8 g |
| Pe | 1200 W |
| Sensitivity | 97.8 dB |
Alignment hint
| EBP | 105 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 51.8 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 18P1200Nd | 37 +0.2 | 0.339 +0.02 | 198 -3 | 8.4 +1.9 | 98.3 +0.5 | close | + | |
| PD PDN 18SB40 | 38.5 +1.7 | 0.326 +0.01 | 201.3 +0.3 | 6 -0.5 | 98.6 +0.8 | close | 600 W vs 1200 W: lower power handling · Xmax 6 mm < 6.5 mm: lower excursion-limited SPL | + |
| Precision Devices PDN 18SB40 | 38.5 +1.7 | 0.326 +0.01 | 201.3 +0.3 | 6 -0.5 | 98.6 +0.8 | close | 600 W vs 1200 W: lower power handling · Xmax 6 mm < 6.5 mm: lower excursion-limited SPL | + |
| Fane COLOSSUS 18XT5N | 36 -0.8 | 0.331 +0.01 | 185 -16 | 8.4 +1.9 | 97.4 -0.4 | close | + | |
| Faital PRO 18HP1022 | 35 -1.8 | 0.3 -0.02 | 204.9 +3.9 | 9.5 +3 | 98 +0.2 | close | + | |
| Oberton 18XB700 | 36.1 -0.7 | 0.304 -0.02 | 183.22 -17.78 | 9 +2.5 | 98 +0.2 | close | + | |
| 18 Sound 18LW2420 | 34 -2.8 | 0.31 -0.01 | 208 +7 | 10 +3.5 | 98 +0.2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 18LW1400 | 33 -3.8 | 0.32 = | 210 +9 | 9 +2.5 | 97 -0.8 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Fane 18-800N | 38 +1.2 | 0.306 -0.01 | 217 +16 | 7.1 +0.6 | 99.5 +1.7 | close | 800 W vs 1200 W: lower power handling | + |
| Beyma 18G50 | 40 +3.2 | 0.321 = | 212 +11 | 6 -0.5 | 99.3 +1.5 | close | 750 W vs 1200 W: lower power handling · Xmax 6 mm < 6.5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 18 K 4 PL →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.