Sica 12 SR 4 CP
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 38 Hz |
| Qts | 0.3 |
| Qes | 0.31 |
| Qms | 4.78 |
| Vas | 41.7 L |
| Sd | 490.9 cm² |
| Xmax | 9 mm |
| Re | 5.2 Ω |
| Bl | 24 T·m |
| Mms | 144.6 g |
| Pe | 1000 W |
| Sensitivity | 92.6 dB |
Alignment hint
| EBP | 123 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 9.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 12BG100 | 39 +1 | 0.33 +0.03 | 41 -0.7 | 10.5 +1.5 | 93 +0.4 | close | + | |
| B&C 12 BG 100 | 39 +1 | 0.333 +0.03 | 41 -0.7 | 7.8 -1.2 | 92.4 -0.2 | close | Xmax 7.8 mm < 9 mm: lower excursion-limited SPL | + |
| Soundstream SPLX-122 | 35 -3 | 0.322 +0.02 | 40.2 -1.5 | 8 -1 | 92 -0.6 | close | 750 W vs 1000 W: lower power handling · Xmax 8 mm < 9 mm: lower excursion-limited SPL | + |
| Eminence DEFINIMAX 4012ULF-8 | 40 +2 | 0.31 +0.01 | 41.342 -0.36 | 6.7 -2.3 | 91 -1.6 | close | Xmax 6.7 mm < 9 mm: lower excursion-limited SPL | + |
| Sica 12 PNS 4 | 41.7 +3.7 | 0.31 +0.01 | 50.2 +8.5 | 9.5 +0.5 | 94.5 +1.9 | close | + | |
| Faital PRO 12RS550 | 42 +4 | 0.37 +0.07 | 45.4 +3.7 | 9.25 +0.25 | 93 +0.4 | usable | 500 W vs 1000 W: lower power handling | + |
| B&C 12SW115 | 38 = | 0.25 -0.05 | 34 -7.7 | 13.5 +4.5 | 92.5 -0.1 | usable | + | |
| Faital PRO 12HP1030 | 45 +7 | 0.3 = | 35.9 -5.8 | 12.45 +3.45 | 95 +2.4 | usable | + | |
| B&C 12PS100 | 44 +6 | 0.27 -0.03 | 47 +5.3 | 8 -1 | 93 +0.4 | usable | 700 W vs 1000 W: lower power handling · Xmax 8 mm < 9 mm: lower excursion-limited SPL | + |
| Beyma 12LEX1000Fe | 49 +11 | 0.3 = | 38.4 -3.3 | 11 +2 | 95 +2.4 | usable | + |
Compare the closest 3 against the 12 SR 4 CP →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.