← all drivers

Sica 10 SR 2 CP

10" · 8 Ω · 200 W · 89.8 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance8 Ω
Fs32.8 Hz
Qts0.49
Qes0.56
Qms4.54
Vas73 L
Sd339.8 cm²
Xmax7 mm
Re6.07 Ω
Bl10.85 T·m
Mms52.5 g
Pe200 W
Sensitivity89.8 dB

Alignment hint

EBP59 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 67.4 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Peerless SLS W 10-30/0833 +0.20.51 +0.0269.3 -3.76.5 -0.589.9 +0.1close100 W vs 200 W: lower power handling · Xmax 6.5 mm < 7 mm: lower excursion-limited SPL+
SICA 10 SR 2 PL32.6 -0.20.481 -0.0182.3 +9.36.5 -0.590.6 +0.8close150 W vs 200 W: lower power handling · Xmax 6.5 mm < 7 mm: lower excursion-limited SPL+
Sound Storm Labs SS1032.3 -0.50.505 +0.0272.1 -0.911.2 +4.292.6 +2.8close4 Ω vs 8 Ω: amp load changes+
Peerless SLS10 83066833.3 +0.50.51 +0.0269.3 -3.75.4 -1.690.1 +0.3close70 W vs 200 W: lower power handling · Xmax 5.4 mm < 7 mm: lower excursion-limited SPL+
Peerless SLS10 P830668 v201232 -0.80.545 +0.0672.9 -0.15.7 -1.389.6 -0.2close70 W vs 200 W: lower power handling · Xmax 5.7 mm < 7 mm: lower excursion-limited SPL+
Monacor SPH-10M29 -3.80.488 =73.5 +0.56.3 -0.787.6 -2.2close120 W vs 200 W: lower power handling · Xmax 6.3 mm < 7 mm: lower excursion-limited SPL+
Peerless SLS10 P830668 v200933 +0.20.591 +0.175.7 +2.75.8 -1.289.7 -0.1close70 W vs 200 W: lower power handling · Xmax 5.8 mm < 7 mm: lower excursion-limited SPL+
Pioneer TS-WS303F32 -0.80.415 -0.0870 -37.3 +0.392.8 +3close4 Ω vs 8 Ω: amp load changes+
Celestion PULSE XL 10.20-837.5 +4.70.459 -0.0376.9 +3.98.3 +1.392.5 +2.7close+
Beyma 10BR60 V2 vp JF bleu32 -0.80.459 -0.0399.9 +26.96.5 -0.590 +0.2close100 W vs 200 W: lower power handling · Xmax 6.5 mm < 7 mm: lower excursion-limited SPL+

Compare the closest 3 against the 10 SR 2 CP →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.